Question about Sony Cyber-Shot DSC-P73 Digital Camera
Hi! I'm trying to install original as well as updated drivers for my Sony Cybershot DSCP73 camera on Windows ME (updated!) but it recognizes the camera as unknown device. I've tried to enable device, checked for conflicts but nothing. This happened after I reinstalled Windows ME (clean install). Before (on old WinME) the drivers were installed on first time and the camera was recognized. What should be the problem? My configuration: Compaq Presario 7500 64MB RAM 8GB HD Please help! Thanx!
I'd try an USB 2.0 PCI card, then wipe the machine and use the Restore CDs back to when it worked.
Posted on Sep 08, 2005
Try http://www.usbman.com but the usual is there plus motherboard drivers, enabling the USB in the bios and more. I'd comment further, but you didn't list the CPU (AMD/Intel, etc) and I offer this note without bother of the research of what the PC is. That's for you to make a good and complete post and not me to dig out what the machine is.
Posted on Sep 08, 2005
100 views
Usually answered in minutes!
×