Screen view area or size, font and channel logo are too large and outside the viewing area, how do we reset ?

You likely zoomed in with control-scroll up/down, try control-scroll to zoom back out. If only the font (not the windows) got larger, reset font view size with apple-0 (command-zero). HTH.

1. Go into your Control Panel by first clicking on the Start Button.
   
2. Then click on the Control Panel icon located in the right column of the Start Menu.
   
3. If your Start Menu is set to the CLASSIC VIEW then begin by clicking on the Start Button.
   
4. Then click on Settings, then click on the Control Panel icon to open up the Control Panel.
   
5. Now, Double click on the Display icon to open up the Display Properties Window.
   
6. Then click on the Appearance tab at the top of the screen.
   
7. At the bottom left side of the screen you will see an area to change the Font Size:
   
8. Use your mouse to switch between normal, large and extra large according to your preference.
   
9. Then click on the OK button to save your changes and exit Display Properties window.
   
10. Windows XP will immediately adjust to your new Font Size without restarting your system.
    
11. Then close the Control Panel to return back to your Windows Session.

i use samsung corby 2 . so need help how t0 change the fonts. and were did i get ?

You did not specify your operating system.
For Windows XP
Go into your Control Panel by first clicking on the Start Button.
Then click on the Control Panel icon located in the right column of the Start Menu.
If your Start Menu is set to the Classic View, then begin by clicking on the Start Button.
Then click on Settings, then click on the Control Panel icon to open up the Control Panel.
Now, Double click on the Display icon to open up the Display Properties Window.
Then click on the Appearance tab at the top of the screen.
At the bottom left side of the screen you will see an area to change the Font Size:
Use your mouse to switch between normal, large and extra large according to your preference.
Then click on the OK button to save your changes and exit Display Properties window.
Windows XP will immediately adjust to your new Font Size without restarting your system.
Then close the Control Panel to return back to your Windows Session.

This depends upon what program you are running.

If you mean the Internet, you can change the view settings on most browsers by zooming in (go to "View" in your toolbar).

If it's a Microsoft application like "Word" or "Excel", you can increase the font size or the magnification of the document - again, from the toolbar.

Click on your Desktop with the right mouse button and select Properties from the Shortcut menu that appears. In the Properties window, click on the Appearance tab. At the bottom of the Appearance tab you will see "Font size:" click on that drop-down menu and you can select Normal, Large Fonts, or Extra-Large Fonts. This is how you change the size of the text that is specific to Windows.
To change the size of the text in Internet Explorer, open up Internet Explorer and find the View menu (it should be near the top left of the screen) click on View and in the menu that pops down, hover your mouse over Text Size so the menu will pop out to the right, here you can select Smallest, Smaller, Normal, Large, Larger, and Largest.
If you would like to increase the size of everything in Internet Explorer, you can hover over Zoom in the View pop down menu and change how much you are zoomed in, this will increase everything for you!

I hope this helps! If not, please comment back and let us know!

Hello Lawrie,

You don't actually adjust fonts or resolution on the monitor, you do adjust them in the control panel of the computer. To do this, open your start menu, select Control panel. When the control panel is open check the top left corner to see if it is in Classic or Category view, if it says Category, click the switch to classic mode link. If you don't see this in the top left look at the top right and look for Category or Large Icon View, if Category is selected select Large Icon by clicking on Category and then clicking Large Icon View in the list that appears.

Once in the proper view, click on Display and depending which version of windows you have select Settings on the top of the properties window(XP or older) or adjust resolution from the left column(Vista/7), now find the slider bar for resolution and slide it higher if you want the font smaller or lower if you want the fonts larger. This will set the number of pixels on the screen.

The default and best resolution for this monitor is 1280x1024, if that makes the fonts too small try 1024x768 next and 800x600 last. If the resolution is set too low to see the Ok and Apply button simply set the slider bar then press the enter button the first time, then you will be able to see the Ok and Apply if you need to continue adjusting.

Hope this helps Fixya,

Chris

Reply back with your version of windows if you require more specific instructions or pictures of any of the steps.

A. right click on desktop > properties > Appearance and choose in the lowest entry large or extra large fonts

B. Change screen resolution desktop > properties > settings. Go to screen resolution

C. in a browser (i.e. IE) under view you can either choose "Zoom" (for everything) or "Text size" (only text)

Assuming you have a MS Windows OS. There are a couple of ways to remedy this situation. Option one is to change the screen resolution by right clicking on the desktop screen and selecting Properties and then Settings. Change the Screen Resolution to something lower than the current setting. This will cause everything to enlarge on the screen. Option 2 is to just change the font size as the standard. Right click on the desktop screen and select Properties. Select Appearance and change the Font Size to Large Fonts or Extra Large Fonts. If you are trying to change the font in Internet Explorer then choose View/Text Size, select Larger or Largest. That will change only the fonts inside Internet Explorer.