Question about Mitsubishi WD-52525 52" Rear Projection HDTV
SOURCE: Mitsubishi WD-62526
Here's something that might also be useful. After you turn on
the set, and get the regular red blinky lights, hold down the Device
and Menu buttons together for about 5 seconds.
The Power light will start to flash in a two digit sequence.
For example, 3 flashes, then 7 flashes = 37.
Here are the error codes, and the corresponding problem:
12 = No error detected, check power supply.
32 = Lamp Cover is open.
33 = Air filter cover is open.
34 = Lamp abnormality
36 = Light Engine (DMD or Lamp Fan stopped)
37 = Exhaust or Lamp Ballast Fan stopped
38 = Lamp Temperature High
39 = DMD Temperature High
41 = Short is detected
44 = DVI cable between FMT and Engine disconnected
Posted on Feb 11, 2008
SOURCE: Tv brightness
I just bought an e 62525 on craigslist for $300 dollars. The guy had it in his garage because of a degraded picture... white out haze and virtually no black ... I surfed for similar issues most referring to the light engine. However; going back to basics. I removed the front panel assembly (approximately 16 screws including the center panel surrounding the card/rca ports in the front). The main mirror was spotless (in itself missleading) but the projection lense and the smaller mirror were frosted over with 3+ years of fine dust. I cleaned them with a simple cloth. I also noted that the foam insert surrounding the lense had gaps due to age which allowed excessive light sepage (the white out problem). I repositioned the foam as best I could. Then simply stuffed a black cloth over the foam but firmly arround the lense (keeping the foam intact as well). This blocked "all" light sepage. Bottom line is that I now have a picture quality that is flat out incredible! This is one bad mutha (shut yo mouth) tv. P.S. I'm just an average guy with an electric screw driver.
Posted on Nov 27, 2008
SOURCE: Picture is very dark
its probably the lamp going bad. dark picture is a pre-cursor to failure. these lamps are supposed to last 2-4 years but for some reason the mitsubishi ones never do. you can replace the lamp yourself, and if it is going bad, you can cool it down, pull it out, and you will see it will look kind of bulged or white in the bulb part. instructions are in your user manual. if it is under a year old, mitsubishi should still cover it. if its just over a year, you can try to call them and complain and maybe they'll back it up. let me know if you need further assistance.
Posted on Jun 06, 2010
Testimonial: "thank you so much "
Tips for a great answer:
Sep 21, 2014 | Mitsubishi WD-73733 73" HDTV
Nov 02, 2013 | Mitsubishi WD-62526 Projection TV
Jan 14, 2011 | Mitsubishi WD-62526 Projection TV
Oct 19, 2010 | Mitsubishi WD-62526 Projection TV
Aug 17, 2009 | Mitsubishi WD-62525 62" Rear Projection...
Jul 03, 2009 | Mitsubishi WD-62526 Projection TV
Sep 10, 2008 | Mitsubishi WD-52525 52" Rear Projection...
Jan 13, 2008 | Mitsubishi WD-62525 62" Rear Projection...
Jun 03, 2007 | Mitsubishi WS-55809 55" Rear Projection...
154 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: