I cannot get my document printed. when i try to print I get the message printer is busy then , another message that states a printing error occurred appears

The Epson printers are famous as there are lots of features with the quality of printing. Being so good at printing, these printers can also face technical glitches as well as have technical faults. The faults and glitches are mostly in the form of errors. There are various errors that these printers are going to face. One of the most common errors that this printer is going to face the Epson Printer in Error State Windows 10.

The printer in an error state signifies that the printer is unable to print. This error can occur easily when there is any piece of paper or paper clip that is stuck in the areas of the printer. This error can also occur when if any part of the printer is not working correctly as it used to.

In order to resolve this Epson Printer in Error State Windows 10, you need to follow the steps written in the blog. There are sure going to help you resolve the error.

Check below if you want an immediate & expert-written solution.

Blog : Epson Printer In Error State Windows 10

Hello,

Please download and run the HP Print and Scan Doctor from www.hp.com/go/tool

Dear Diogo,

This error message occurs when the print head life is over. Every print head is designed with a specific life time (it is purely a mechanical device). Once the life time is over you will get this error message.

I recommend you to calibrate the print head, if you have that option in the software or front panel display(if any). Also, you can try using a new set of cartridges (if you printer is ink jet)

Thanks and regards,
Dr Tony.

Try using the HP Print Diagnostic Utility in Windows - HP Customer Care (United States - English)

Sounds like a driver problem. I would try disconnecting the printer from your computer and power cycling it (unplug it for a few minutes). While it's unplug uninstall and then reinstall the print driver. If that does work email me.

[email protected]

1. Power off your printer.
2. Use both hands to lift up the scanner unit until the scanner support holds it open.
3. Turn the printer on. The print cartridge carrier moves and stops at the loading position, unless the printer is busy.
4. Remove the color print cartridge.
5. Lower the scanner unit until it is completely closed.
6. If the error message reappears, replace the black print cartridge with a new print cartridge.
   If it does not repeat steps 1-3 and then go to step 7.
7. Reinstall the color cartridge and remove the black print cartridge.
8. Lower the scanner unit until it is completely closed.
9. If the error message occurs again, replace the color cartridge.
10. If an error message reappears, repeat steps 1-3 and reinstall both print cartridges.

Hope this helps.

1. Lower the scanner unit until it is completely closed.
2. If you receive the error message again, replace both cartridges.

It could be a hardware issue.
Check first if the printer is working fine. Keep on holding down the paper button while you turn the printer on. Let go of the paper button when the power light starts to flash. if it printed out a color test pattern successfully, check if you are using the corrrect driver.
Tell me more if you need assistance in trashing and re-installing the proper driver for your printer. Include the full version of the operating system you are using too.
Goodluck.

sherlyn c.

Can you print to your default printer?
What printer is OO trying to print to?

Try pushing the print head carriage with a bit of gentle force. It is getting stuck, and hence the error. You may have to open side and top covers to reach this. Note: this is not the cartridges, but another device that moves back and forth on the slider carriage.

download ir 3100c ps3 no eur