I NEED CODE FOR A ZENITH DVD FOR THE URC6131 - One For All URC6131n Remote Control

Please try code : 01, 24, 25, 29, or 37.

Regards

need to program the remote, need the code for it

OK... now some DVDs cannot be hacked / or unlocked for regions BUT

go to e-Bay and search for dvd region unlock code... there are some there BUT go into a couple to see if they will let you contact them FIRST to see if yours can be unlocked BEFORE YOU BUY.

Good luck...

In my manual, to control a sony TV.. the code is number 8 or number 9.

You will hold down TV POWER, hit 8 then release TV POWER.
If that doesn't work, try number 9. Once the batteries are removed, it resets the code, so write it down. It will also over ride your old codes once you input the new one.

Note: Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code.


I looked for the section on Stereo, but all I found was the above.
Hope this helps.

i assume you mean the code for a remote control,
try 0503 or 0591 or 0741

no display my player.i need this player reset code or remote code.

a gpx dvd player

Hello, follow this link to download the manual and the codes for your remotes:
http://www.ofausa.com/remote.php?type=URC6131
just right click and save as on the download links.

if this does not work you can try the search method,
you do this by either holding down the device button eg: TV or if you have one the "magic" button for three seconds, a light should then flash twice to say you have done this correctly.
then press the keys 991 then the power button.
you must now press the channel up key (ch+) possibly upto 150 times while the remote cycles through every code.
Once your tv or device switches off stop pressing the ch+ key and press the power button to make sure it switches back on,
(if you press ch+ too many times you can go back by pressing ch-)
When complete press the magic or device key again to save the settings (light should flash twice to confirm)

Many thanks
Mark
(For replacement remotes visit www.sparky-uk.com)

I need codes for my Universal Philips Magnavox remote for a Sanyodvd vcr combo ?

the code for Sony dvd is 276 for this remote control. I suggest using the Aux button. The entiere user manual and codes can be found at
http://www.remotecentral.com/cgi-bin/files/dl.cgi?file=others/zenith/zen100-700-manual.zip&area=other