I CONECTED A DIFFERENT SPEAKER TO MY HOME THEATER, AND NOW THE HOME THEATER JUST NOT WORKING NOW, WHAT CAN I DO?

If your Samsung HT-E330K home theater system is not producing any sound even though the power display seems to be working fine, there are several potential causes and troubleshooting steps you can try:
1. **Check Volume Levels:** Make sure the volume on the home theater system and the connected TV (if applicable) is turned up and not muted.
2. **Check Audio Source:** Verify that the correct audio source is selected on the home theater system. If you're using multiple input sources (DVD, TV, AUX, etc.), make sure the right input source is selected.
3. **Audio Cables:** Ensure that all audio cables are securely connected to both the home theater system and the audio source (TV, DVD player, etc.). Sometimes, loose or faulty cables can result in no sound.
4. **Speaker Connections:** Check that all speakers are properly connected to the home theater system and that the speaker wires are securely inserted into the appropriate terminals.
5. **Audio Settings:** Go through the audio settings on both the home theater system and the connected TV (if applicable). Ensure that the correct audio output settings are configured.
6. **Mute Function:** Double-check that the mute function on the remote control or the home theater system itself is not engaged.
7. **Speaker Balance:** Check the speaker balance settings to ensure that sound is not unintentionally directed to one side or speaker.
8. **Reset to Default Settings:** If you've made any changes to the settings recently, consider performing a factory reset to revert to the default settings.
9. **Firmware Update:** If there is a firmware update available for your home theater system, consider updating the firmware as it might resolve any software-related issues.
10. **Test with Different Source:** Test the home theater system with different audio sources to rule out issues with a particular device.
11. **Test Speakers:** If possible, disconnect each speaker one at a time and test the audio to identify if a particular speaker or speaker wire is causing the issue.
12. **Check Speaker Impedance:** Ensure that the speakers' impedance matches the specifications of the home theater system. Mismatched impedance can affect sound quality.
13. **Contact Support:** If you've tried these steps and still have no sound, consider contacting Samsung customer support or seeking assistance from a professional technician for further troubleshooting and repair.
Remember to refer to your device's user manual for specific instructions related to your model.

use hdmi direc conect from source set to auxliary

The speakers can be tested with a meter, but if the voltage is different from the USA you may have damaged them instantly if connected to wrong voltage, I presume if I understand correctly it is some kind of surround sound system, voltage in North America is 110=120 volts and 50=60 Hz.

Check the wiring to that speaker and then the conections

To enable the full potential of a SUB for Yamaha DSP A5 ,

you need to have

a separate amplifier for your Bose Acoustimass System.


The SUB out should be connected to an active subwoofer.

Verify that all speakers work for test tones first. The center carries most of the dialog. It's in the manual, as is your symptom (page 101).

HI,
press the sound button on the players remote to select different sound field. select one which suits to you.
ok

They are called composite video and audio connections. (RCA jack style)

Please refer below urs
http://www.bose.com/controller?url=/shop_online/home_theater/21channel_systems/cinemate_systems/cinemate_series2/index.jsp
Thanks

Make sure that ALL ur cable r well conected! Sometimes just by moving cables it makes a difference.