Question about Panasonic AG-185 Camcorder

1 Answer

Panasonic PS/NS-GS200 - Some enquiries!

I just bought a Panasonic NS-GS200 Digital Camcorder yesterday at a store in Malaysia. It was amazing. But i have couple of questions to ask and wonder whether you can help me out. Questions ---------- 1. I notice some videos taken, when they try to video shoot a computer monitor, from the video it does not flicker. But when i take a video at my own computer monitor, it seems to flicker a lot. I am running on a 60Hz frame rate on my monitor. I did not modify any settings on the digital camcorder. Any help please? I do not want to see flickering on my videos. 2. I notice that my hand shakes a lot when i shoot a video. I know that there is a feature to reduce hand shake right in some digital camera models? Does my models comes with this feature? 3. Last question, what is backlight meant for? When i shoot videos in the dark, do i need that to be on? Any help please? Thanks.

Posted by Anonymous on

Ad

1 Answer

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points
    All-Star:

    An expert that got 10 achievements.
    MVP:

    An expert that got 5 achievements.
    Master:

    An expert who has achieved Level 3.

  • Master
  • 473 Answers

1. try changing your screen refresh rate. 2. yes, it is called EIS. you can switch it on from the menus. The EIS does not work well in low light. a tripod is your best bet for a steady camera. 3. the backlight feature back lights the LCD screen only. to shoot in low light switch the camera mode to manual and change the menu setting to low light. the magic pix mode will help you shoot in the dark but any movement will become blurred. Again, best to use a tripod in this situation. Detailed information for items two and three should be in your manual.

Posted on Sep 06, 2005

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0 Answers

I've charge my batery to full but when i used it on my panasonic nv gs200 it won start and the indicator on the camera has no light. please help me with this problem. I've tried both of my batteries a

Feb 24, 2018 | Panasonic NV-GS200 Mini DV Digital...

1 Answer

Panasonic nv-gs200 driver
Hi,
You can download the drivers from this link

Hope this helps.Thanks!

Oct 28, 2011 | Panasonic NV-GS200 Mini DV Digital...

1 Answer

My nv gs200 camcorder not suport any sd card. this problem is comes in few days ago.
That's correct.
Older cameras cannot support the newer SDHC cards.
You camera is most likely limited to a 4 gig card.
Check your camera manaul for specifics.

Mar 15, 2011 | Panasonic NV-GS200 Mini DV Digital...

1 Answer

I cant connect my NV-gs200 to windows 7 to get a video off it.
Connect with an appropriate firewire cable.
Many users try USB which will only transfewr Still photos.

Mar 04, 2011 | Panasonic NV-GS200 Mini DV Digital...

1 Answer

My Panasonic PV-GS200 Camcorder gives me a "Card Error" once I turn to the Camera mode and press the [PHOTO SHOT] button, and it shows a red crossed picture. Is there anyway to fix it by myself?...
Do you have a memory card installed? If you do, try another card - it might be the card that's bad.

Nov 13, 2010 | Panasonic NV-GS200 Mini DV Digital...

1 Answer

NV-GS200 Mini DV Digital Camcorder: How do I play from camera to tv...
plug in red white and yellow cable into your camera and tv

May 16, 2010 | Panasonic NV-GS200 Mini DV Digital...

1 Answer

Dubbing from vcr tape onto panasonic NV-GS200
its not posible, because the camcorder doesn't have inputs it only has outputs

Aug 13, 2009 | Panasonic NV-GS200 Mini DV Digital...

1 Answer

When camcorder is turned on the screen shows red or yellow screen
I have the same problem of picture distortion when recording on my PV-GS200 camcorder. It's due to a faulty CCD block, which you can read about on various websites. I can play back pre-CCD failure tapes without a problem. Panasonic recalled quite a few GS200 camcorders with specific serial numbers in the US and Canada, and replaced the faulty 3-CCD chip free of charge. I just discovered this tonight and intend to ring Panasonic tomorrow, as the camcorder - bought new - lasted only two years before the CCD fault became apparent. Obviously, the camcorder was not of merchantable quality.

Jan 27, 2009 | Panasonic Palmcorder PV-GS200 Mini DV...

2 Answers

Green Hue on Screen
Important Notice
Digital 3CCD Camcorder


Panasonic has discovered a premature component failure with a limited number of PV-DV953 (2003 Model) and PV-GS200 (2004 Model) 3CCD camcorders, which may cause an abnormal camera picture (incorrect color reproduction, reddish, noisy image, etc). This anomaly is limited to a specific range of serial numbers listed below.

If your camcorder demonstrates the specific symptom and falls within the serial number range, Panasonic will repair the camcorder free of charge.

Please call the following toll-free number for assistance in receiving a free repair:

Panasonic Call Center: 1-800-973-4264


Model # Serial Number Ranges

PV-DV953 (2003) E3Hxxxxxx, F3Hxxxxxx, G3Hxxxxxx, H3Hxxxxxx, I3Hxxxxxx, J3Hxxxxxx, K3Hxxxxxx, L3Hxxxxxx and A4Hxxxxxx
PV-GS200 (2004) C4Hxxxxxx and D4Hxxxxxx

Sep 24, 2007 | Panasonic NV-GS200 Mini DV Digital...

2 Answers

Red lines on screen when recording
Important Notice
Digital 3CCD Camcorder


Panasonic has discovered a premature component failure with a limited number of PV-DV953 (2003 Model) and PV-GS200 (2004 Model) 3CCD camcorders, which may cause an abnormal camera picture (incorrect color reproduction, reddish, noisy image, etc). This anomaly is limited to a specific range of serial numbers listed below.

If your camcorder demonstrates the specific symptom and falls within the serial number range, Panasonic will repair the camcorder free of charge.

Please call the following toll-free number for assistance in receiving a free repair:

Panasonic Call Center: 1-800-973-4264


Model # Serial Number Ranges

PV-DV953 (2003) E3Hxxxxxx, F3Hxxxxxx, G3Hxxxxxx, H3Hxxxxxx, I3Hxxxxxx, J3Hxxxxxx, K3Hxxxxxx, L3Hxxxxxx and A4Hxxxxxx
PV-GS200 (2004) C4Hxxxxxx and D4Hxxxxxx

Nov 19, 2006 | Panasonic NV-GS200 Mini DV Digital...

Not finding what you are looking for?

View Most Popular

AG-185 Camcorder

  • Video Cameras

Related Question

I've charge my batery to full but when i used it on my panasonic nv gs200 it won start and the indicator on the camera has no light. please help me with this problem. I've tried both of my batteries a

  • Panasonic NV-GS200 Mini DV Digital Camcorder

Open Questions:

0 Answers

Hi, I have a panasonic nv-gs55 and have some ntsc mini dv tapes. can i configure it to play them?

Aug 15, 2011 | Panasonic AG-185 Camcorder

0 Answers

PANASONIC NV-S900 PALMCODER... There is an error massage on the view finder - screen. CODE : F O5 Pls, describe the solution? e-mail : [email protected] .com

Dec 28, 2007 | Panasonic AG-185 Camcorder

0 Answers

where is the port for fire wire I am trying to connect my canon video camera to an acer pc but I cannot find the ieee 1394 port. An acer aspire pc m1610

Dec 26, 2007 | Panasonic AG-185 Camcorder

Related Topics

Panasonic AG-185 Camcorder Logo

73 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

3 Answers
Warning PSD NG Panasonic DVX100A

Panasonic AG-DVX100 Mini DV...

1 Answer
How can i set zeebra in panasonic 102b video

Panasonic AG-DVX102AE DV...

3 Answers
Showing warning psd ng in dvx102 panasonic video cam

Panasonic AG-DVX100A Mini DV...

2 Answers
Auto off cylinder lock error

Panasonic AG-DVX100 Mini DV...

1 Answer
Is there an easy fix to Panasonic AG-DVC7 camcorder error F05, cylinder lock?

Panasonic Proline AG-DVC7 Mini...

Top Panasonic Video Cameras Experts

Kenneth Walker

Level 2 Expert

293 Answers

Cindy Wells

Level 3 Expert

6234 Answers

Pieter Vleeshouwers
Pieter Vleeshouwers

Level 3 Expert

2027 Answers

Are you a Panasonic Video Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...