PC to Camcorder feed (for powerpoint)

yer like trhe guy said flick the top mine works great now cheers mate

You may need a MiniDV head cleaner tape. Read the instructions on the tape carefully and good luck.

you cannot move the spindles/cogs in a mini dv tape without pressing down a small lever on the rear of the cassette.
the lever is in the lower right, move the lever, then move the ribbon protector to the open position, then spin the cogs, the tape should be free.
if not, then you have a jamm inside the cassette, you can open these casettes by removing 4 small screws. ( this is a very fiddly job & you may ruin the casette, if you dont know how )

I had the same problem. In desperation, I picked up my trusty can of compressed air and aimed a few shots into the recorder/playback mechanism. Worked like charm.

clean the head with cotton swab

first of all you should have your cd driver came with camcorder and as far as i know your driver isnt compatible with vista so better try to use windows xp. install the driver, plug your camcorder using your usb. upload your videos from your camcorder to your pc using ULEAD MOVIE MAKER. edit it and save it with any various types of videos. finish!

CHARCOIS

Hi...

Here is the url to the drivers and manual for that specific camera.
You can download the drivers as well as find out how to set up your camcorder for a webcam

http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/model.PV-GS14

~~Jasta~~

open up the LCD screen and on the control panle you will find the reset button in the top right corner get a pin and push the button

Can anyone give any information on this problem? I am having the same problem, on Christmas of all days. Any help would be much appreciated. Thanks

I am having the exact sam problem on my PV-GS14. Have you been able to resolve the problem? If you have, how were you able to get the tape out? Thanks