Scanner F919600 not working in win 7 - Canon CanoScan LIDE50 Flatbed Scanner

is windows 7 32 bit version or 64 bit version . Suggest downloading drivers that match the windows 7 operating system and installing them.
http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=14558&infoType=Downloads

.

If you scanner only has Win XP drivers, then you have only two choices as those drivers wont work on WIN 7. One is to buy a new scanner, as you have already suggested. The other is to create a virtual machine, load WIN XP onto it, and then install the scanner drivers on the virtual machine. This should work fine as I do it for a piece of software that only works on WIN XP, however it is a bit of a inconvenience to use.

You will have to go the scanner manufactur and ask fort the WIN 7 Driver or it may already be on your original install disk.

got to the web site for the scanner manufacturer select down load for that model and select win 7 os
down load and run
Microsoft no longer supports win 7 so the scanner driver will not be listed in win 7

If your using window 7 pro right click on the scanner program & run troubleshoot compatibility then follow instructions

You can download scanner Driver from this site.

• Memorex Scanner Driver

According to this page:

http://support.visioneer.com/products/5800/downloads.asp

The scanner works on windows 98, ME, 2000 and windows XP. There is no driver for Vista or for Windows 7.

I posted this for another user but i'll post it here too,

I remember looking for hours for a driver for my Epson 1200 scanner back when I upgraded by dad to Vista 64 Bit, eventually I found one. Just today I upgraded him to Windows 7 64 bit and remembered I couldn't get it to work, luckily I was able to dig up the driver I used for Vista 64. Worked great in Windows 7.

I can't remember where I found it so I can't credit the person who made the driver unfortunately, however i've uploaded it to Rapidshare for you to download. Here is the link:

http://rapidshare.com/files/324940248/epsonScan_1.0_Per1200Win64eu.zip.html

Just open up the zip file and run the setup. :)

Hope this helps, Merry Christmas!

Was it all working OK before you upgraded from VISTA? If yes this sounds like a driver problem. Visit the cannon site and download their latest drivers for Win 7 - that is if there are any yet. As an early adoptor of Win 7 you can expect to have issues with hardware drivers where manufacturers have not yet developed them for Win 7. Once Win 7 has been out and about for 12 to 18 months most manufactures will have caught up and issued new drivers.