Question about Sharp AR-5320 Black and White Copier
Have you tried a trouble clear?
Posted on Jul 12, 2011
My printer have error f2
Posted on Aug 15, 2012
SOURCE: error code Sharp AR-M 257
The F2-04 error code you are getting is that you are using the wrong toner.It may be form sharp,but it toner chips is different.Only the chips swapping at the toner back can help you.
Posted on Jan 27, 2009
H3-00 means there was a problem in the fuser unit of the copier - a temperature problem. The correct temperature is not reached within a certain time.
It could be a thermostat or thermistor problem - both monitor temperature. you could remove the fuser unit and make sure these items are clean - no build up on them. there should be a center and side thermistor.
You can reset the error code in SIM mode by pressing the following keys one after the other "P" "interupt" "C" "interupt" then 14 and start/copy key. confirm if required. make sure the copier is restarted afterwards.
If the error persists then you may need new thermistors.
Hope this helps.
Posted on Apr 12, 2009
SOURCE: H2 problem sharp AR 5516
is that mean, I have going down to simulation by pressing
# interrupt 0 interrupt then machine wil shutdown mode than press 14 then press start.
is that true? because I mess up with my copier cannot print because code H2.
Posted on Sep 30, 2012
Tips for a great answer:
May 20, 2014 | Sharp AR-5320 Black and White Copier
Jul 04, 2012 | Sharp AR-5316 Advanced Digital Imager...
Apr 24, 2012 | Sharp AR-5516s
Nov 16, 2011 | Office Equipment & Supplies
Oct 09, 2011 | Sharp AR-5316 Advanced Digital Imager...
Sep 03, 2011 | Sharp AR-5316 Advanced Digital Imager...
Mar 12, 2010 | Sharp AR-5320 Black and White Copier
Nov 07, 2016 | Sharp AR-5320 Black and White Copier
3,723 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: