An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert who has achieved Level 3.
Re: E-125 connecting to Siemens ME 45
There are 2 things you could try.
If you have a serial data cable for both the devices try using a nul modem (Casio part # SB-91 includes best nul modem ever made ) & select Hayes compatible on serial port on E-125. If you have a built in modem in ME-45 it should work.
Similarly you could use MS Outlook as an intermediary for transferring your E-125 telephone numbers to ME-45.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I had the same problem with an E125 which I brought off eBay that hadn't been used for several months.
I took out the backup battery and put the main battery in it's holder with a bare wire held onto the negative & positive terminals. When I turned on the charger, I held the other end of the bare wires onto a partly charged Nokia Battery (Also 3.7V internal). The current from this battery was enough to let the Casio start charging. After two minutes I disconnected the Nokia battery and gently tugged the bared wires free. The Casio kept on charging happily. After six hours I disconnected the AC charger, installed a new backup battery CR2032, and everything was go.
Check the PC connection setting on your EM-500 for IrDA connection. You will also have to change the speed settings to match that on the PC.
You should have "IR activesynch" icon under start - programs -connections. Tap on this to connect through the IR port.
Windows CE like the version you have do not use drivers
persay. You need a program like the Peacemaker that has
the support built in. There are no such thing as installable
drivers like the desktop Windows.
The newer PocketPC's have this feature built into Windows CE.
You will need 2 things.
Software to load on your E-125. The included Cd with your Nokia should have it.
You will need a special cable to connect Nokia to E-125. I don't know where you will find it easily.
There is a firm in Finland which makes all kinds of cables to connect different models of Cassiopeias to different models of mobile phones - essentially Siemens, Nokia & Ericsson. They run about US$ 50/=
Last time I saw their listing it was 4 pages long. You might have to do some searching on the net or contact Casio for information.
Hope this helps.