Can someone please tell me how do i get subtitles off i had to reset my default and now i cant get subtitles off i have gone throught the manual & the menu . i have a flatscreen bush tv series A6 please help its driving me nuts thank you

Second button from left side of handset bottom second row of your remote control turns subtitles on & off alba TV

basicly you havent set up the settings so that the programs connect throught the wireless. they are probably trying to connect throught the pc cable witch isnt there.

Please watch the full video. The annotations(subtitles) that show up are to correct what I say or inform you more, read them. The video shows where you can get the links, so just follow it.

Ms. Padilla, you need to enter the menu settings in your television, should be a menu button on you tv set. Once in menu go to picture or scroll through the menus untill you find caption, once you locate that you can turn the subtitles off.

TV mode:
Open the menu and go to features then subtitle.
Switch off analogue subtitle.
Scroll to 1st subtitle and then scroll through the languages until "off" comes up.
Repeat for 2nd subtitle.

Hey presto... they gone!!!!!! :-)

You have to reset when new cartidges are installed throught the LCD panel.

See the attached manual and look up page 42 where is shows how to reset your router to the default settings. The default ip is 192.168.1.1.

the link is: ftp://ftp.zyxel.com/P-660HW-D1_v2/user_guide/P-660HW-D1%20v2_3.40_Ed1.pdf

If this solves your problem, leave feedback please.

My philips is model 29PT854A/78R and I can't seem to be able to find the manual to download it to my computer.

Can you please help me? Maybe you can tell me the site or web page for that specific tv manual?

I appreciate your help at your earliest convenience. My email: [email protected]
Thank you very much.

Sincerely,

Jeannette Fort

try 0000

if you never put a lock code into the phone, it should respond to the factory default. check with your carrier for the default code if its not 0000. the manual also will usually tell you the default code.

barring that, you might remove the sim card, reset the phone (see the manual), then reinsert the sim card and reboot.

if you installed the card with the phone plugged in (some units will stay alive with the charger connected) you could have damaged both the card and the phone. try the card in the original location to see if its corrupt.

good luck
m