Question about Olympus Camedia C-770 Digital Camera

1 Answer

Indoor flash images are blurry

My indoor flash images are blurry, what would cause this to happen?

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 852 Answers

It is possible you have the Flash Mode set to one of the Slow Sync modes (lighting bolt with the word Slow). Slow synchronization flash sets a slow shutter speed for the background exposure and fires the flash for the subject exposure. Since the shutter speed is slow, your subject should be still and the camera should be on a tripod otherwise blur can result. Since this mode should only be used when the above conditions can be met, you should use the FILL-IN FLASH (single lighting bolt symbol) mode for most situations that require a flash for correct exposure. Repeatedly pressing the FLASH MODE button will cycle through the various flash mode settings.

Posted on Sep 04, 2005

Ad

4 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 852 Answers

SOURCE: Images are blurry

It is possible you have the Flash Mode set to one of the Slow Sync modes (lighting bolt with the word Slow). Slow synchronization flash sets a slow shutter speed for the background exposure and fires the flash for the subject exposure. Since the shutter speed is slow, your subject should be still and the camera should be on a tripod otherwise blur can result. Since this mode should only be used when the above conditions can be met, you should use the FILL-IN FLASH (single lighting bolt symbol) mode for most situations that require a flash for correct exposure. Repeatedly pressing the FLASH MODE button will cycle through the various flash mode settings.

Posted on Sep 04, 2005

Anonymous

  • 852 Answers

SOURCE: Flash images are blurry

It is possible you have the Flash Mode set to one of the Slow Sync modes (lighting bolt with the word Slow). Slow synchronization flash sets a slow shutter speed for the background exposure and fires the flash for the subject exposure. Since the shutter speed is slow, your subject should be still and the camera should be on a tripod otherwise blur can result. Since this mode should only be used when the above conditions can be met, you should use the FILL-IN FLASH (single lighting bolt symbol) mode for most situations that require a flash for correct exposure. Repeatedly pressing the FLASH MODE button will cycle through the various flash mode settings.

Posted on Sep 04, 2005

Anonymous

  • 852 Answers

SOURCE: Indoor flash images are blurry

It is possible you have the Flash Mode set to one of the Slow Sync modes (lighting bolt with the word Slow). Slow synchronization flash sets a slow shutter speed for the background exposure and fires the flash for the subject exposure. Since the shutter speed is slow, your subject should be still and the camera should be on a tripod otherwise blur can result. Since this mode should only be used when the above conditions can be met, you should use the FILL-IN FLASH (single lighting bolt symbol) mode for most situations that require a flash for correct exposure. Repeatedly pressing the FLASH MODE button will cycle through the various flash mode settings.

Posted on Sep 04, 2005

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sanyo Xacti CA6EX shows just steaky, blurry image


Sounds tasty! ;)

Just kidding. What kind of stReaky images is it recording? Is the problem that you are using it in bad light (eg indoors at night)? It could just be camera shake.

Make sure that your camera is in auto mode and try again - if it was in a slow shutter speed mode, then this could be more of a problem. Also try using flash, if you camera has one.

Oct 27, 2009 | Video Cameras

1 Answer

Blurry pictures after I have had no trouble in the past


If this is happening only in low-light situations when the flash is not on, check your manual to turn the camera's high-sensitivity feature on. Or change the ISO to the highest setting (1000 is good) for these pictures. That should reduce blur and shake. Of course, putting the camera on a tripod or beanbag, or resting your elbows on a solid surface, will have the same effect.

Jun 05, 2009 | Sony Cyber-shot DSC-S650 Digital Camera

3 Answers

Blurry photos that are really frustrating!


Evening & Indoors? The kit lens is really going to struggle here. Your only immediate solution is to use ISO 1600 which makes the shutter faster but adds a little noise to the pictures.

You really want to get a better lens for indoor work. If you need cheap, try the 50mm f1.8, it's a prime not a zoom, so you will need to use your feet to "zoom" but it's incredibly good for indoor / low light work.

I upgraded to a 17-55mm f2.8 IS, it was rather expensive but I have never had a blurry indoor shot since - I do also use an external Speedlite flash with it though, which also helps tremendously.

It's an expensive hobby!!

Nov 04, 2008 | Canon EOS 400D / Rebel XTi Digital Camera

1 Answer

Blurry


Hey abbyr,
The most common cause of blurry images is called camera shake which is the slight movement of the camera caused by hand holding the camera during exposure. This cause can be solved by setting the camera to shutter priority and shooting with a faster shutter speed (1/60th of a second or faster). If you are using flash this is most likely not the problem since the shutter speed with flash is irrelevant since the duration of the flash determines the exposure. Another cause of blurry pictures is caused by not prefocusing on your subject prior to taking the image by holding the shutter button half way down so the camera can achieve proper focus before taking the picture. If none of this helps I would bring your camera to a local camera store and have an expert look at it and make sure you have it set up properly, and if you do I would have it looked at by an authorized service technician. I hope this helps!

Sincerely,
Allan
Go Ahead. Use Us.

May 26, 2008 | Canon Rebel XT / EOS 350D Digital Camera

2 Answers

Pictures out of focus indoors


Maybe your camera has a problem with flash unit. Replacing the flash unit can solve the problem. Part number of the flash unit is: A7113088A. If you need more help, please advice. Arpi

Mar 17, 2007 | Sony Cyber-Shot DSC-P93 Digital Camera

1 Answer

Why do my Fun! Digital 320 pictures come out blurry?


Blurry images can be caused by any or all of the following: * Distance/Focus range -- the Fun! Digital 320 has a fixed focus range of 3 - 6 feet (1.8 meters) for brightly lit indoor photography, 3 ft. (1 meter) - infinity for outdoor photography. For best results, make sure that the camera is at least 3 feet away from the subject(s) when taking pictures. * Camera/Subject movement -- This is a common cause of blurriness, especially in low-light situations (see Lighting below). Hold the camera as steadily as possible while taking a photo, or use a tripod (a tripod mount is located on the bottom of the camera). Avoid subjects that are in motion. * Insufficient lighting -- the Fun! Digital 320 is designed for taking photos outdoors or in brightly lit environments. Inadequate lighting can exaggerate camera movement and contribute to blurred, "muddied," or uncrisp images. * Lens condition -- Check the lens periodically for smudges. If necessary, wipe the lens clean with a soft, lint-free cloth. Do not use cleaning solutions or chemically treated tissues. * Enlarging images using software -- otherwise normal digital images can appear to become blurry and/or blotchy when over-enlarged in software. To see an image's "true" appearance, use the software's Zoom In or Zoom Out feature to view it at 100%.

Sep 14, 2005 | Polaroid PhotoMax Fun 320 Digital Camera

1 Answer

Pentax S4 no flash problem


Well this camera has no manual controls so it's merely compensating for the lack of available light by lowering the shutter speed. I don't think there's very much you can do about it -- maybe you can try to lower the EV -/+ setting (I forget what it's called, it makes your image darker or brighter). If the camera didn't lower the shutter speed you would simply get dark pictures where you can't see anything

Sep 08, 2005 | Pentax Optio S4 Digital Camera

1 Answer

Indoor flash images are blurry


It is possible you have the Flash Mode set to one of the Slow Sync modes (lighting bolt with the word Slow). Slow synchronization flash sets a slow shutter speed for the background exposure and fires the flash for the subject exposure. Since the shutter speed is slow, your subject should be still and the camera should be on a tripod otherwise blur can result. Since this mode should only be used when the above conditions can be met, you should use the FILL-IN FLASH (single lighting bolt symbol) mode for most situations that require a flash for correct exposure. Repeatedly pressing the FLASH MODE button will cycle through the various flash mode settings.

Sep 04, 2005 | Olympus Camedia C-765 Digital Camera

1 Answer

Flash images are blurry


It is possible you have the Flash Mode set to one of the Slow Sync modes (lighting bolt with the word Slow). Slow synchronization flash sets a slow shutter speed for the background exposure and fires the flash for the subject exposure. Since the shutter speed is slow, your subject should be still and the camera should be on a tripod otherwise blur can result. Since this mode should only be used when the above conditions can be met, you should use the FILL-IN FLASH (single lighting bolt symbol) mode for most situations that require a flash for correct exposure. Repeatedly pressing the FLASH MODE button will cycle through the various flash mode settings.

Sep 04, 2005 | Olympus C-7000 Zoom Digital Camera

1 Answer

Images are blurry


It is possible you have the Flash Mode set to one of the Slow Sync modes (lighting bolt with the word Slow). Slow synchronization flash sets a slow shutter speed for the background exposure and fires the flash for the subject exposure. Since the shutter speed is slow, your subject should be still and the camera should be on a tripod otherwise blur can result. Since this mode should only be used when the above conditions can be met, you should use the FILL-IN FLASH (single lighting bolt symbol) mode for most situations that require a flash for correct exposure. Repeatedly pressing the FLASH MODE button will cycle through the various flash mode settings.

Sep 04, 2005 | Olympus Camedia C-5500/C-55 Sports Zoom...

Not finding what you are looking for?
Olympus Camedia C-770 Digital Camera Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top Olympus Cameras Experts

Steven Wander
Steven Wander

Level 3 Expert

594 Answers

Ekse

Level 3 Expert

13434 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you an Olympus Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...