I HAVE A LG FLATRON M197WA LCD TV MONITOR . HOW I CAN OPEN BOTH TV AND PC AT A TIME ? HOW I ADJUST THE MONITOR TO VIEW BOTH IN A SINGLE WINDOW? 0919830151045

A single line indicates a failure in one of the hundreds of connections on the back of the LED display panel. It normally cannot be repaired, but can be replaced. It may be more cost-effective to replace the unit.

Similar to TV - you need to adjust the "H" - Horizontal and "V" - Vertical. Horizontal will move picture up or down and Vertical will adjust left to right.

Use the menu button on your monitor.

Check all the pins on the VGA cable first, also try it with another PC to make sure it is not the video card.
Please post back what you find.

http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums

There is no audio line in because it does not have built-in speakers: http://www.lg.com/ca_en/computer-products/monitors/LG-lcd-monitor-L1718S.jsp

http://www.overstock.com/Electronics/LG-Flatron-L1718S-BN-LCD-Monitor-17-0.264mm-Black/2637396/product.html

Failed TV and monitors: http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague

It means your PC video output resolution is too high for the LG monitor to display (your old monitor (CRT) can handle higher resolution than this LG LCD monitor), you need to set the PC video resolution to native resolutionof this monitor which is 1280 x 1024 @60Hz. You may have to use the old monitor (CRT) to set the resolution to 1280 x 1024@60Hz, then hook up the LCD monitor.

LG Flatron L 1510S LCD Monitor Drivers : Download from this website:
http://driverscollection.com/?H=L1510S&By=LG

open directly link and download from website, then install in your PC. Your problem will be solved

The FLATRON L1715S color LCD monitor with auto-synchronous support, plus it is PC and MAC compatible, has features like simple one button auto setup and is VESA DDC2B, DDC1, Plug and Play compatible.
use the 'Auto' adjust button on ur lcd..
howevr, if u want to configure using win xp/vista..right click on ur desktop->properties->settings->increase the 'screen resolution' to minimum: 640x350 or standard: 1152x864 or maximum: 1280x1024 @ 75Hz..
best is to seek professional advice of ur system admin/vendor....

dear frinds
    press the menu remote hand set then go to function and press voll+          then display  child lock on-off and go to off

press menu button it is in middele of lcd.
Ten go to setigns and u can fine reset buton press ok.

Hello Monastirion,

Is the red line there all of the time without exception, for instance when you initially turn on your pc, is it there before the operating system boots?

If so, the monitor itself is most likely broken. I would return it to wherever you bought it, if possible.

Regards,

-Chester