Question about Frigidaire 30" Self-Cleaning Freestanding Electric Range - White-on-White
The oven and display clock on the digital display stopped working. The oven will not turn on, the digital display is total gone as well. I checked the fuses and they are fine. I think it is electrical. Does anyone know why this would happen and how to fix it?
My frigidaire oven will not light. The broiler works and the oven ingiter lights up, but the oven will not ingite. The electronic display does work.
Posted on Aug 12, 2010
My eoc is not working on my oven burners work fine but no clock or oven controls please help
Posted on Jul 05, 2010
FixYourBoard.com can fix this for you! 2 year warranty. I've attached a photo of what the display would look like after the service. 
×
If the oven was working before then
1. Power is gone from the unit - loose connector or neutral wire ( or ground wire depending on wiring system being used)
2. The power supply transformer (or transistor) on control board is busted. This is especially true if there was power problems in the apartment- power going on and off frequently. Check the wiring and see what comes up. Hope that helps
Regards
Posted on Sep 04, 2008
Oven and control panel/clock won't come on
Posted on Sep 12, 2008
have your electronic timer sent for repairs, go on internet at ApplianceTomers.com
Posted on Nov 11, 2008
Our people make the difference
Hello steve o - Typically error code F11 indicates a shorted keypad. Try resetting the range by unplugging it or flipping the household circuit breaker off. This usually will clear most false error codes. Wait approximately ten minutes and if the error code does not clear contact a professional to move forward accurately. Most likely the EOC on the range will need replacing.
Posted on Nov 13, 2012
Hello steve o - Typically error code F11 indicates a shorted keypad. Try resetting the range by unplugging it or flipping the household circuit breaker off. This usually will clear most false error codes. Wait approximately ten minutes and if the error code does not clear contact a professional to move forward accurately. Most likely the EOC on the range will need replacing.
Hi
This means a
loose/broken wire on the oven temp sensor or the oven temp. sensor itself is
bad and should be replaced. To solve this issue test the oven temp. sensor, it
should read between 1080-1120 ohms, if the rating is more then that and the
door appears to be closing fine then it is the control board that is bad and
should be replaced. Hope this helps...please post back for further assistance.
Daniel
11,440 views
Usually answered in minutes!
still does not work
It cannot be electrical as the light inside the oven is working just fine.
The gas on the range top is working fine, as well.
It is the control panel - will not light up, blink or start the oven...
I have the same problem with my frigidaire oven. Control Panel that works the oven does not light up or work. The burners work fine.
My control panel is also out. Ive flipped the breaker but to no avail...I took the back off of my oven to see if there was any obvious damage. Im no electrician so im not quick sure what im looking at. My house was hit by lightening a while back so i think something has blown involving the panel...is there some fuse i should replace??
Control Panel Won't Come on, top burners work. Someone mentioned checking fuses and breaker. Let's start with the basics, where are they and how is this done? If I must replace to EOC (Elec. Oven Control), where on the over is this?
How to check digital clock as now oven want go.is it a fuse problem
Having the same issue with my Frigidaire range...clock assembly and oven out but burners are fine. Just watched a video (YouTube) on changing the control board. I'm going to buy one this weekend and try it. (It looks like an easy fix.) Fingers crossed!
×