How do I clean the printer waste ink absorber on my pixma ip6600D

These canon printers are basically a throw away item. You can remove the absorber and clean it thoroughly which is a very messy job and the reset may still not work. You can go online and get a third part reset procedures, of which most do not work. I know this sounds so negative but I have tried many of these and Canon will NOT give out the rest codes.

hi

you need to buy the waste toner container (its inexpnsive, plastci container that holds waste toner

go to this site first and follow instructions on HOW TO CLEAN THE INK ABSORBER

http://www.wikihow.com/Clean-the-Canon-Pixma-IP1000-Printer-Waste-Ink-Absorber

Hi

The wast ink absorber full, if you want to clean the ink absorber at home without wast money, i will provide you the example in Canon printer,how clean you ink absorber follow the mention below instruction and remove the error of ink absorber.

http://www.wikihow.com/Clean-the-Canon-Pixma-IP1000-Printer-Waste-Ink-Absorber

God Luck

Please refer to a visual demo of waste ink cleaning

http://www.youtube.com/watch?v=HYtQxzvru4w

you need to reset the waste ink absorber

the waste ink absorber cannot be replaced mate. you have to buy new printer.the waste ink absorber is the sponge part where head cleans all its ink. its a common problem in cannon.

You need to replace the ink absorber kit and to completely disassemble the printer to replace the absorber. Attempting to clean the ink absorber is not recommended. Self servicing the absorber can be a very messy operation. I would check with a Canon repair center to see what the cost to have the servicing done by a trained technician. In some cases, it is cheaper to replace the printer.

canon pixma ip1000 printer, how do you access and clean waste ink absorber pad

We are not advice to clean WASTE INK ABSORBER.
It's time to replace 3's WASTE INK ABSORBER KIT & reset waste ink counter.
The WASTE INK ABSORBER KIT is approx. USD10/pcs

cannon pixma ip4000 waste ink absorber is almost full what do i do, getting patchy printing, have cleaned and deap cleaned and this hasn't ;helped