Question about Sunbeam 805810 HeatSense Heating Pad Heater

2 Answers

Get F2 error code on sunbeam heating pad model cat93, contrller sw404

Posted by dkremnant on

Ad

2 Answers

dickholtz

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Crimped the ends of the heating pad cord where it attaches to the pad a little then did the plug and unplug three times while holding down the on-off button and that did the trick

Posted on Nov 29, 2012

  • dickholtz
    dickholtz Nov 29, 2012

    Crimped the ends of the heating pad cord where it attaches to the pad a little then did the plug and unplug three times while holding down the on-off button and that did the trick

  • Francine Panagopoulos
    Francine Panagopoulos Sep 01, 2020

    It didn't work I tried it twice and it still didn't work

×

Ad

Dick Snider

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 742 Answers

Do you have the manual?

if not, ask the manufacturer or here

Posted on Jan 03, 2012

Ad

1 Related Answer

Anonymous

  • 1 Answer

SOURCE: Sunbeam Heating pad will not reset

Have the same problem. I have contacted Sunbeam support via email and they are very friendly and helpful so far. I will post when resolved.

Posted on Jul 30, 2008

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sunbeam heating pad model 828-511 is showing F2 on controller


Hello, Pat -

I can only find that the F2 error code means there is "a problem;" not what the problem is.

I suggest you go to this Sunbeam web page for your model of heating pad:
http://www.sunbeam.com/pain-relief/back-and-spine/sunbeam-microplush-body-shaped-heating-pad-with-digital-lcd-controller/000828-511-002.html

You should see a link for "Live Chat" on the right side of the page. Click or tap on "Live Chat" to text with a Sunbeam Customer Service Representative. He or she should be able to explain the F2 error code and what can be done to correct it.

Best wishes.

Mar 07, 2018 | Office Equipment & Supplies

1 Answer

I have a Sunbeam model 970 heat pad. I plugged in and controller just reads F2....I can't find any instructions or know how to fix. Can you help?


Hello Carrie,

You may be able to download an instruction manual from Sunbeam directly here: Instruction Manuals at Sunbeam com
Otherwise, you might need to use their contact us feature and ask directly.

I hope this helps!


helpful-rmh1nkwavuqlpyc44d3sgb0s-4-0_2.png

Feb 11, 2018 | Sunbeam Heating & Cooling

1 Answer

Sunbeam heated mattress pad blinking F2 on one side. How do I turn it off?


https://www.manualslib.com/manual/532253/Sunbeam-Sleep-Warm-Sleep-Well.html?page=12

Jan 06, 2018 | Sunbeam Heating & Cooling

1 Answer

Sunbeam electric blanket f2 code


hi Bonnie.
try this link and read what other people are saying about the problem you have.just scroll down on the page and read.
or this one.
Electric blanket error code
or this one.

Get F2 error code on sunbeam heating pad model cat93 contrller sw404

Dec 03, 2017 | Sunbeam Heating & Cooling

2 Answers

Sunbeam heating pad no longer heats. The red


I had same issue w/ red blinking light on my Sunbeam controller SW114, pad CAT93. Was about to toss away but then got it to work perfectly by doing this:1. With unit UNplugged, press & hold the single grey controller button2. While pressing the controller button, plug the unit inUnit will power up in the 'warm' (green light) setting; pressing the controller button will cycle you thru the others modes.

Jan 12, 2010 | Kitchen Appliances - Others

17 Answers

New heating pad not working


have same problem with heating pad . reset control by unplugging unit for 1 minute , while holding down power button plugged unit back in . sometimes this takes 3 or 4 tries.

Apr 26, 2008 | Sunbeam 805810 HeatSense Heating Pad...

4 Answers

Malfunction heating pad


Same F2, quick off problem here. Then I noticed that the gray plug on the power cord was not completely flush with the connector on the pad. I shoved them together until there is no gap. The unit's worked perfectly since then.

Mar 24, 2008 | Sunbeam 805810 HeatSense Heating Pad...

8 Answers

Sunbeam Heating pad will not reset


I have a Sunbeam heating pad with the SW204 controller that the High light blinks when it is plugged in. I called Sunbeam and the first thing they said is it cannot be plugged into a surge protector. Next, to reset it unplug it from the wall, then unplug the controller from the heating pad. Wait 30 seconds, then plug the controller back into the heating pad and then into the wall. It did the trick. However, when I move it to the bedroom plug it does the same blinking. Sunbeam is sending me a replacement heating pad. They appear to be very good with Customer Service since it is more than a year old.

Mar 21, 2008 | Heating & Cooling

Not finding what you are looking for?
Sunbeam 805810 HeatSense Heating Pad Heater Logo

Related Topics:

9,144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sunbeam Heating & Cooling Experts

Paul Carew

Level 3 Expert

3527 Answers

Brad Brown

Level 3 Expert

18513 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Sunbeam Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...