I can not find a replacement chain for my Remington branch wizard do you know where i can find one ?

Remington Pole Saw Carbon Brushes
If you're Remington Pole Saw is slowing down, throwing sparks, overheating or not starting you may need to replace the carbon brushes. Replacing brushes and cleaning commutator early can prevent damage to motor armature!
Remington carbon brushes on E-bay Search for:
Remington Pole Saw 8 AMP Carbon Brush

I don't mean to sound offensive, but is the chain on the right way? I've put 'em on backwards, even started the saw before I noticed. And is the chain running when the motor runs?

If the chain is right then you may have gotten a chain with a bad grind. Never heard of it but it could sure happen. Get back with me if the chain is right and it's turning- we'll get it to cut.

lp

Take it back. Remington Power is no longer in production anyway. You will eventually need parts that you will not be able to find.

Is the chain excessively tight? Remove the Sprocket cover, bar and chain. Actuate the switch momentarily while watching the sprocket gear (item 11).
http://www.masterparts.net/111409-01.html
Did it rotate? If no there is likely a failure in the gear train inside the power head (not repairable). If it rotates I suspect the chain was improperly installed or over tightened.

If you have more questions or need additional help please reply below and I will get back to you. Thank you for using FixYa and Good Luck. HTH
Lou

Remington.com
http://www.desaparts.com/index.htm

• Type "YourModelNo" into the "Model #:" window, then click search.
• Click the YourModelNo - Remington Electric Chain Saw "View Model" link.
• Click “View Owners Manual” or "View Illustrated Parts Breakdown" link.

Items 13 and 14 on your IPB
6" Guide Bar $12.98 and 6" Chain $11.97

Remington Power has stopped production and many replacement parts are NLA. I suggest you waste little time ordering these. HTH
Lou

this washer could stop the cutter blads from springing apart when your cutting,,, try fitting a washer to find out if this is realy the problem,,,,

check the bottom of the chain guard, look for a loose bolt just inside the housing.

Remington has ceased production. Parts availability is limited to what is on hand. Probably time to purchase a new pole saw. Purchase the cheapest product on the shelf and in 5 years they will be out of business too. Poulan and McCulloch (electric) have been in business for a very long time, I expect they will continue to provide a quality product with service after the sale for many years to come. HTH
Lou

Only model numbers work. Examine your saw something should match up here:
http://www.desaparts.com/remington-chainsaw.html
GL
Lou

Those are the sources we would have suggested.
I had some luck here less than a week ago but it no longer works.
http://www.remingtonpowertools.com/product_detail.cgi?file=11.246
Try calling Remington 866-206-2707

Under parts it says you can get an entire refurbished unit for $59.99, but why would you? We can help no further. Sorry
Lou

Here is a link to the installation instructions for a chain, this should help you! http://12.153.20.74/manuals/113556-01A.pdf.