How do i get ot the aux channel? - Televison & Video

You should not have to specifically plug a servo into the AUX for binding. try a dif. receiver to see if it works.

Auxiliary output sockets (AUX 1-6) would usually be used for connecting to an FX unit input, with the signal levels sent to the FX unit governed by the AUX SEND pots from each input channel, setting the AUX MASTER at a level that will prevent peak signals from the various channels (sent to the FX unit) from clipping the AUX bus rails.
The output of your FX unit can be then be returned to stereo line input sockets (ST1-4).
For details see the GL2400 User Guide:
AUX OUT 1-6 (p.15),
AUX SENDS (p.17/18),
AUX MASTERS (p.19),
STEREO CHANNEL LINE IN (p.14).
If you require more precise EQ parameter control of FX return signals - and you have sufficient spare channels on the desk, connect to 2 x mono channel inputs:
one from left FX return, one from right FX return, with each of the console's input channels panned hard-left/hard-right (this assumes the FX unit has a stereo return).

Our old tv is stuck on Channel 2 and will only change ot aux. Help!

you must be on a box, put your tv on channel 2or3 then with the control for the bx channel up-down if not then just do channel up-down manualy

wow

pick up a universal remote

Do you have the correct scart socket plugged in this is usually a common problem easily sorted..
swampy

Take out the channel up button and use a small, long object (like a pencil or pen) and repeatly press the button under until AUX comes up.

Press channel down until you get to channel 1 then press channel down one more time ,this should give you your AUX.If it doesnt try going into the menu and doing an autoprogram with the video game hooked up and turned on.

You can purchase an RCA universal remote that will let you access the A-V inputs. These only cost about $10.00 or so. Stargazer