Cannot figure out how to set the clock on my pioneer 40wx4 super tuner d...held the clock button down but still couldn't ever get it to flash nor did pressing any buttons do anything...helllllp

http://www.pioneerelectronics.com/PUSA/Car/CD-Receivers/DEH-P2900MP

there's some links on the web page above to the installation and owners manual

Gerry M I have a pioneer 40wx4 super tuner III D I lost my manuael and want to change the time on the clock and could someone tell me how to do it

On a pioneer, turn the deck off(hold down source), then hold down the function key the clock will come up and you can use the arrows to change the values.

most you hold down the time button and push up or down. try something similiar, hold down a button and push an up button? just play with it but don't reset it andcause more problems

I found a manual for my super tuner at http://audio.manualsonline.com/manuals/mfg/pioneer/pioneer_cd_player_product_list.html
No tricks, there's an offer but click skip and get your manual.

Press and hold down the "clock" button. You should see your time start flashing. Normally you set the time with the volume or channel control. Check which control lets the selector jump from "hou" to "minute and set the minutes. To exit setting menu, depress "clock" button again

ok what u do is turn radio off hit clock so that it displays the time then hold audio button in until clock starts flashing then use your arrow ****. not your vol. ****.

the clock does not flash by pressing the (src) source button. press (scr) source button until clock appears then press the func function button (it is just under the audio button) then the clock will flash. press the up down buttons to change the hour then press the side to side buttons to switch to the minutes then press the up down button to change the minutes

For most Pioneer single CD players, you can set the clock using the following steps:

1. Press and hold the SOURCE button until the unit turns off.
2.Press and hold the FUNCTION button, until display pops up, then release.
(If you do not have a FUNCTION button, then push the AUDIO button)
3. Press the FUNCTION button again until the clock shows on the display.
4. Press the UP and DOWN buttons to adjust the hours.
5. Press the LEFT or RIGHT arrows to move to the minutes.
6.Press the UP and DOWN to adjust minutes.
7. When complete, press the SOURCE button to exit.

• 1 year ago

I have deh 1450, turn ign on, radio off. On mine I pressed and held the top right button (audio) clock starts flashing. Set time using directional buttons (up, down, left, right) When finished I pressed the 'loud' button (bottom right of face plate to end