Question about Canon PowerShot SD300 / IXUS 40 Digital Camera

Error 50 I am getting an error 50 code what could I do?

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.
Expert
255 Answers

The "E50" error code indicates formatting a SD card has failed. Solution To clear the "E50" error, try performing the following procedure. 1. Try using another SD card. If you have another SD card, try loading it in the camera. If the error code is not displayed when the other SD card is loaded, there may be something wrong with the first one rather than with the camera. 2. Use your computer's ScanDisk utility to check the SD card for errors. Use ScanDisk to check the SD card for card error or card failure. Refer to the instruction manual for your operating system or Windows Help for further instructions. (If you are using a Macintosh, use the "Disk First Aid" program to check for card error or card failure. Refer to the instruction manual for your Macintosh OS for further information.) Be sure to back up the data on the SD card on the computer before you check the SD card. If a card error or card failure occurs when you use your computer's ScanDisk, there is something wrong with the SD card. Follow ScanDisk's on-screen instructions to solve the problem.

Posted on Aug 31, 2005

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

2 Answers

How to fix error code 50 on EFX 5.21i?

Precor Error 50, Too Much Brake (Magnet) Current Probable Cause 1. Shorted or damaged wiring between the lower PCA and the eddy current magnet is the most common cause for this error.
2. Bad eddy current magnet.
3. Bad lower PCA.
Corrective Action

Thoroughly inspect the eddy current wiring and connections ensuring that the wires are not shorted to the frame or shorted together. Repair or replace damaged wiring as necessary.
Disconnect the wires from the eddy current magnet. Using an ohm meter, check for approximately 100 ohms across the eddy current magnet terminals. If the reading is considerably low, replace the eddy current magnet. Measure ohms between each eddy current magnet terminal and the frame ground. You should have no resistance between the eddy current magnet terminal and the frame ground. If resistance is present this would indicate a partial short, replace the eddy current magnet.
If the eddy current magnet wiring and the eddy current magnet are both good from the above tests, replace the lower PCA.

Error 50 Too Much Brake Current on Precor Cardio Equipment

May 22, 2014 | Precor Exercise & Fitness

1 Answer

Brother error code dcp-j 125 unable to Init 50

hi good day! the printer is error 50 due to a paper or some sensor error.. open the printer, or dismantle, clean the sensor and wash the pump of water and change the waste pad of new absorber. locate the sensor under the pump, clean it of alcohol.

Mar 17, 2014 | Brother DCP 165C Compact Color Inkjet...

1 Answer

Fujitsu plasma 50 inch error

hi. Conditios 1 or 2?

Apr 10, 2013 | Fujitsu P50XHA10 50 in. Plasma Television

1 Answer

Error code 50

Error Code E50. This printer error code flashes when the fuser unit of your Brother multifunction printer gets damaged. When this happens, it is a signal that you must replace your printer's fuser unit

Mar 15, 2011 | Brother Multi-Function Center MFC-240C...

1 Answer

What is error 50 on the precor efx546

Precor uses the same error codes for all of their units. Error code 50 is for excessive brake (eddy current magnet) current.

Mar 19, 2010 | Precor EFX 546i Elliptical Version 4

3 Answers

My printer brother DCP115C ''UNABLE TO CLEAN error code 50''

Machine error 50 is a error in Purge unit.You can't fix it by yourself and your printer need service.In most case the cost of repair is more than cost of new printer.

Nov 03, 2009 | Brother DCP 115C All-In-One InkJet Printer

1 Answer