"System Error" message in LCD - Nikon Coolpix 3200 Digital Camera

www.liutilities.com/device-driver/belinea-10-17-10

www.techsupportforum.com

Error LCD: System Error EXXX (MF4400/MF4500/D500 Series)

Description:

A system error has occurred. <XXX> will be a three-digit code that indicates a particular type of error.

Action:

Turn OFF the main power switch, wait for more than 5 seconds, then turn it ON again. If the message persists, turn OFF the main power switch, disconnect the power cord, and contact Canon Customer Care Center.

Here are the beep codes for the Thinkpad:" Continuous beeping System board failure One beep; Unreadable, blank or flashing LCD LCD connector problem; LCD backlight inverter failure; video adapter faulty; LCD assembly faulty; System board failure; power supply failure One beep; Message "Unable to access boot source" Boot device failure; system board failure One long, two short beeps System board failure; Video adapter problem; LCD assembly failure One long, four short beeps Low battery voltage One beep every second Low battery voltage Two short beeps with error codes POST error message Two short beeps System board failure.

Having a "System Error" message display on the camera's LCD display generally indicates a problem where the camera will need to come to Nikon for repair. A System Error is a general error which can be caused by many things: lens problem, CF Card problem, general camera failure, etc. Before sending the camera in, check these:

1. Use the memory card that originally came with the camera (or a Nikon approved card) [/*]
2. Remove and replace the battery [/*]

Hi!

Unfortunately, system error one is apparently a hardware issue. It means something about the memory being lost in your Harmony Remote. I had to get a replacement Harmony Remote from Logitech but you would have to see if you are still in your warranty period!!!

I hope you are so you can get a replacement!!! =)

-Kennedy

Hi,
Please click on the below link or copy the URL and paste it in your web browser. Follow the steps..
http://support.lexmark.com/perl/support/support.cgi?ccs=229:1:0:93:0:0&docid=ENUS547
OR

If you are getting any type of 'CLEAR SYSTEM ERROR' on the LCD screen of the printer, please follow these steps:
1) Remove the power cable for 2 minutes and the USB cable from behind the printer.
2) Press and hold down the stop clear button and reconnect the power cable back to printer.
3) The printer LCD screen should clear the memory error.
4) If the same error message persist on the LCD screen, please follow the instructions below.
5) Unplug the power cable for 2 minutes and USB cables from behind the printer and open the printer cover and remove both ink carts.
6) Repeat step 2 and Install both cartridges then the screen will display Cartridge's clean, press start.

Thank you........

Hi - I found this info on the Nikon Australia website:

"System Error" or "Lens Error" message in LCD monitor Question My COOLPIX camera displays a "System Error" or "Lens Error" message. What should I do? Answer Having a "System Error" or "Lens Error" message displayed on the camera's LCD monitor would generally indicate that your camera needs servicing. A System Error is a general error which can be caused by many things: lens problem, CF Card problem, general camera failure, etc. To troubleshoot, please try the following:

1. Use the memory card that originally came with your camera (or a Nikon approved card).
2. Remove and replace the battery.

On the other hand, a Lens Error generally means that an error has occured during the lens operation. To troubleshoot, please try the following:

1. Turn off the camera.
2. Remove and replace the battery.
3. Turn on the camera.

If the above tips do not help, your camera must be sent to our Nikon Authorised Service Centres, there are no user serviceable parts in our Nikon COOLPIX cameras. We apologize for any inconvenience caused and we will do everything to repair your Nikon camera as quickly as possible. Click Here for our Nikon Authorised Service Centres details.


Sort of like a Windows Restart to reset the memory.

Hope this helps.

Hi I found this info on the Nikon Australia website:

"System Error" or "Lens Error" message in LCD monitor Question My COOLPIX camera displays a "System Error" or "Lens Error" message. What should I do? Answer Having a "System Error" or "Lens Error" message displayed on the camera's LCD monitor would generally indicate that your camera needs servicing. A System Error is a general error which can be caused by many things: lens problem, CF Card problem, general camera failure, etc. To troubleshoot, please try the following:

1. Use the memory card that originally came with your camera (or a Nikon approved card).
2. Remove and replace the battery.

On the other hand, a Lens Error generally means that an error has occured during the lens operation. To troubleshoot, please try the following:

1. Turn off the camera.
2. Remove and replace the battery.
3. Turn on the camera.

If the above tips do not help, your camera must be sent to our Nikon Authorised Service Centres, there are no user serviceable parts in our Nikon COOLPIX cameras. We apologize for any inconvenience caused and we will do everything to repair your Nikon camera as quickly as possible. Click Here for our Nikon Authorised Service Centres details.


Seems you may just have to remove and replace the battery - sort of like a Windows Restart to fix a computer problem! - this would reset your camera's memory.

Hope this helps.

in sytem error you can used HARD format reset...


but in light gets on sometimes but sometimes it's behave like disco light' it's hardware prob. maybe your LCD is weak, or your LCD and LCD connector are not fit or disaaligned, or maybe the top board of your phone....

Having a "System Error" message display on the camera's LCD display generally indicates a problem where the camera will need to come to Nikon for repair. A System Error is a general error which can be caused by many things: lens problem, CF Card problem, general camera failure, etc. Before sending the camera in, check these: Use the memory card that originally came with the camera (or a Nikon approved card) Remove and replace the battery If the error is still displayed, contact Nikon's Service Department. If the above tips do not help the camera must be sent to Nikon Service, there are no user serviceable parts on Nikon Coolpix cameras.