Hello . I Have A Panosonic DVD Player. I Need To Get The Codes For The RCA D770 Remote Control. Also How Do I Enter The Code ?
Thank You For Your Time
Scott
Ello . I Have A Philips DVD Player. I Need To Get The Codes For The RCA D770 Remote Control. Also How Do I Enter The Code ? Thank You For Your Time Scott
Here you find RCA D770 codes :
How do you program an RCA d770 universal remote
Panasonic are : 1003, 1054, 1062, 1170
1000, 1003, 1004, 1005, 1006, 1007
.........................1019, 1096, 1098, 1099, 1100, 1101
.........................1102, 1103, 1129, 1179, 1181, 1187
............................................1188, 1190, 1198, 1199
Proceedings
1. Turn on the device to be programmed.
2. Look up the brand and code number(s) for the device on
the code list at the end of this section.
3. On your remote control, press and hold the device button
you want to program.
4. Enter a code from the code list.
5. Release the device button, and then press ON•OFF to
see if the device responds to the remote control
commands. If it doesn't, try pressing the device button
and then ON•OFF again.
6. If you get no response, repeat these steps using the next
code listed for your brand, until the device responds to
the remote control commands.
NB: Switch Off and On your TV with its front panel power switch each time [NOT BY THE REMOTE CONTROL HANSET], before you try an other code, UNTIL YOU GET THE RIGHT ONE.
336 views
Usually answered in minutes!
×