Currenly looking around for a slave flash unit for my Fuji S7000,Fuji doesn't have one so does anyone know of any that will work with the camera's electronics?Would appreciate the help.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check around the slave valve under the car on the tranny.
There is only 3 places it could leak
The clutch master cylinder
the pipe from the master cylinder to the slave valve
or the slave valve.
Make sure the slave is far enough in fornt of the master flash to see it. If the two flashes are next to each other then the slave is not seeing the master signals.
A slave flash unit is a flash that has a sensor that fires the flash when
it senses the burst of flash from the camera's built-in flash unit.
Since many digital cameras fire the flash twice for each picture (the
first is to set white balance and perhaps focus), these units are
designed so they fire when the camera's second flash goes off.
To use it with your D60, just use your built in flash to fire off the slave flash...
Contact you local Fuji dealer. They should know where you can get parts (or THEY may even to be able to get them for you). It can be done, we fix Fuji stuff all the time.
×