The picture just quit

Check your connectors to be sure they are all plugged in thoroughly.

_________________
BMW scanner 1.4.0 programmer

hello sir

The noise you can hear is not a good one, it is a seek error which means the drive is dead, there are companies who can recover the data but it is not cheap.

Quite mode OFF is the default factory settings. To reduce noise produced by the printer, quite mode need to be turned ON. This will reduce the amount of noise but this will set the printer run at half speed.

To do this click on Menu Button > General settings> Quite Mode> ON and then press the check button to submit.

For further assistance, please contact Lexmark Technical Support.

I have an RCA projection TV P52939 it has no picture, and makes a beeping or ticking sound can you tell me what it is.Thank you

sounds like the light engine there are alot of problems with the light engines and quite a few have had a grinding noise. The only other possibility would be the color wheel. But I would lean heavier toward the light engine being the fault.

I have a 60in Proscan Projection TV. My picture is out and the TV only beeps.

Brian Allen

have the power supply checked

It sound like a pump issue. Open the service panel, remove the pump and try to rotate its pulley manually, it should turn freely.In case it doesn't,check if it is clear from any foreign object or it should be replaced. Good luck !

Beeps means something. Check your manual- there is a more comprehensive manual on the CD If you cannot see anything get onto the Olympus Technical Help team