Change battry braun 6550

Hi christine,
go to this link it might help out ..
replacement chopper bowl lid for Braun mr 6550 hand blender Google Search ..
or you could try ebay..

You will find the correct battery type for Braun 5556u at shaveroutlet.com. See link below

http://shaveroutlet.com/shaver-replacement-parts/shaver-replacement-battery-aa-nimh-p-108.html

the batteries need replaced as soon as possible. you will find the correct battery type at shaveroutlet.com. see link below

http://shaveroutlet.com/shaver-replacement-parts/shaver-replacement-battery-aa-nimh-p-108.html

If you are not equipped to repair yourself, shaveroutlet.com can do it for you. See link below

http://shaveroutlet.com/shaver-replacement-parts/professional-battery-replacement-for-most-models-p-374.html

You will find the correct battery type at shaveroutlet.com. See link below. You will need two batteries.

http://shaveroutlet.com/shaver-replacement-parts/shaver-replacement-battery-aa-nimh-p-108.html

I suggest that you read the installation tip on the item page as well.

Also, does the green charging indicator light still illuminate when you plug the shaver in to charge? If it no longer lights, don't waste your time with the batteries because your have waited too long to change them and the circuit board is now damaged. Unfortunately, circuit boards for model 6550 are no longer available from Braun

Don't.

First, make sure that it is shaver oil. Or Braun appliance oil. Other oils may be too heavy and gum up the shaver. Apply one drop ro each side of the shaver foil periodically. If you need Braun shaver oil. it can be found at shaveroutlet.com

shaveroutlet.com may have a PCB that could work in your 6550 model but from what I discovered it is not the same as the one you currently have. It will make the razor function but the LCD will not be available to show battery life. you will have a red and a green light only. If you can live with this than I would suggest contacting shaveroutlet.com. I have the same problem as I have a model 6550 and I have been looking for a replacement PCB ..Printed Circuit Board but have been unable to find one. Call Brian at shaveroutlet.com. I plan on contacting him next week ...Feb 7, 2013 with same problem

I.fix problem
thanks

click on the link below

http://kitchen.manualsonline.com/manuals/mfg/braun/braun_hand_blender_product_list.html

Unfortunately this is almost impossible. The batteries are part of the circuit board, and Braun only authorize their service agents to replace the whole unit, and my local agent found that it had been discontinued. If you still want to have a go, two screws are hidden beneath the two grey plastic caps either side of the charging socket on the underside of the shaver which can be prized off quite easily. Once you have removed the screws, the small plastic section comes off. Now you can slide the outer casing off. A thin black cover at the back can then be unclipped, revealing the circuit board and batteries. The whole unit simply lifts out and would be easy to replace if you could find one! Rplacing the batteries would be far more difficult and risky. Good luck.