Toshib E-450 fax confirmation.

Hi Dear

HP LaserJet 3050, 3055, 3390, 3392 AiO Product - How to Print a FAX Confirmation Report Description By default, a Fax Confirmation report (Fax Call Report) will only print when a fax error occurs. However, this option can be changed using the printer control panel.

1. Press the right arrow until Reports appears in the display, press the checkmark.
2. Press the right arrow until Fax Call Report appears in the display, press the checkmark.
3. Press the right arrow until Print Report appears in the display, press the checkmark.
4. Right arrow to the option of choice, press the checkmark to save the change.

FAX call report options

• Send Fax Only - a confirmation sheet will only print when a fax is sent
• Never - no fax confirmation sheets
• Every Error - default setting
• Send Error - a fax confirmation prints when the fax transmission encounters an error
• Every Fax - a fax confirmation sheet will print for incoming

Hi,

Follow the steps below to enable the Fax confirmation on Sent and recieved.

On the printer :

1. Press Setup ( ).
2. Press the right arrow button ( ) to select Print Report , and then press OK .
3. Press the right arrow button ( ) to select one of the following options:
   • On Fax Send: Print a confirmation page every time you send a fax.
   • On Fax Receive: Print a confirmation page every time you receive a fax.
   • Send & Receive: Print a confirmation page every time you send or receive a fax.
4. Press OK .

Thank you for contacting FixYa


*Please rate this solution with Thumbs Up

Hi,

Follow the steps to setup the Fax sent confirmation report.

1. Press Setup ( ).
2. Press the right arrow button ( ) to select Print Report , and then press OK .
3. Press the right arrow button ( ) to select one of the following options:
   • On Fax Send: Print a confirmation page every time you send a fax.
4. Press OK .

Other confirmation reports in the same menu are :

• On Fax Receive: Print a confirmation page every time you receive a fax.
• Send & Receive: Print a confirmation page every time you send or receive a fax.

Hope this is helpful

Thank you for contacting FixYa.


*Rating and comments invited on this solution

enable the rx report! thats all.........

The fax machine that is sending you the fax may be also sending a confirmation page that is not needed or compatible with your machine.

I have an older machine that prints a confirmation page after each fax. People on the other end sometimes receive a blank page after each fax that I send them while my machine prints a mostly blank page with only a single line of text at the top with the date and time.

This is an excerpt of the User's Guide for your machine. You can download from here:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=1138342&


Print fax confirmation reports
If you need printed confirmation that your faxes were successfully sent, follow these instructions to enable fax confirmation before sending any faxes. Select either On Fax Send or Send & Receive.
The default fax confirmation setting is Off. This means that the HP All-in-One will not print a confirmation report for each fax sent or received. A confirmation message indicating whether a fax was successfully sent appears briefly on the display after
each transaction.
To enable fax confirmation from the control panel
1. Press Setup.
2. Press 2, and then press 1.
This selects Print Report and then selects Fax Confirmation.
3. Press to select one of the following, and then press OK.

Off Does not print a fax confirmation report when you send and
receive faxes successfully. This is the default setting.
On Fax Send Prints a fax confirmation report for every fax you send.
On Fax Receive Prints a fax confirmation report for every fax you receive.
Send & Receive Prints a fax confirmation report for every fax you send and receive.
User Guide 65
Fax
Tip If you choose On Fax Send or Send & Receive, and scan your fax to send from memory, you can include an image of the first page of the fax on the Fax Sent Confirmation report. Press Setup, press 2, and then press 2 again. Select On from the Image on Fax Send Report menu.

User Tools/Fax/Parameter Settings. Personally I wouldn't mess with those, it's to easy to totally mess up the fax system if you flip the wrong bit switch setting. I threw my 450 programing guides away some time ago being that there's just a hand full of these things left in the hole country. I believe if you go to Ricoh's web site and go to the download page, you can download the fax user manual which if memory serves me (and it often doesn't), you'll find how to change the fax parameter settings.

1. Press Setup on the front panel of the All-in-One.
2. Press 2 to enter in to Print Report.
3. Press 1 to enter in to Fax Confirmation.
4. Press 1 to turn on Fax confirmation
5. Press 2 to enter in to Image on Fax Send Report
6. Press 1 to turn on Image on Fax Send Report

Its called "Transmission Verification Report"
Press Menu, 2, 4, 1
Select ON or On+Image
This will come with every fax you send.
If you want to customize, see owners manual under, "Printing Reports"

Check the link -- if this is the correct device page 44 of the first english manual has the code for changing the confirmation page setting.

http://www2.panasonic.com/consumer-electronics/support/Phones-Fax/Fax-Printers/Plain-Paper-Fax/Copier/model.KX-FG2451