Ice maker stuck

Hi,

Here is a tip that I wrote about the reasons why ice makers do not work.

Ice Maker Problems and Ice Maker Troubleshooting

heatman101

Hello Here is replacement part#AP4345120.. Fairly easy installation.

My book says that ice cubes may be stuck in the ince maker.

Turn off the icemaker, remove the cubes and turn the icemaker gake on.

Icemaker is jamming. Stripper may be bent where the ejector hangs up advise replacing icemaker

A blinking green light on the ice maker indicates, that it needs to be replaced.
Ge profile refrigerator repair in orange county, ca

The blinking light is an indication that your built in water filter needs to be replaced, it's in the refer. side, middle top or rear of refer.

Hi,
Here is a tip that I wrote about the reasons why ice makers do not work.

Ice Maker Problems and Ice Maker Troubleshooting

heatman101


rtwywy

check felter

PROBLEM IS ASSOCIATED WITH THE TEMP SENSOR INSIDE ICE MAKER. I HAVE TRIED TO FIND THE PART, BUT WITH NO LUCK. IT LOOKS LIKE WE WILL HAVE TO PURCHASE A NEW ICE MAKER.

Not sure if this will work for you - I had a similar problem with a Kenmore fridge. I removed the ice tray and found a piece of ice stuck where the ice is made and dropped into the tray. Once I clear this obstruction, the ice maker worked again. Also, check for the mechanism that indicates that the ice tray is full. This may be jammed or malfunctionin.