Question about Kodak EasyShare One Digital Camera

1 Answer

Picture too light

Why is a picture too light?

Posted by Anonymous on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 114 Answers

The cause and solution may include one of the following: The flash is not needed. Change to Flash Off or decrease the flash compensation in any of the PASMC modes (certain cameras only). The subject was too close for flash. Move so that the distance between you and the subject is within the effective flash range. There is too much light. Decrease the exposure compensation. If you use flash, adjust the flash compensation in any of the PASMC modes (certain cameras only). Auto-exposure was not set. Press the shutter button halfway and hold. When the AF/AE indicator turns green, press the shutter button completely down to take the picture (most cameras).

Posted on Aug 29, 2005

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

T45 campark 14 Megapixel CMOS sensor, night pictures black

Pictures probably look black because there is no light at night. Camera need light to take photographs.
Sep 17, 2019 • Cameras
0helpful
1answer

Yellow light on when ready to take picture

On some cameras this means a slow shutter speed and that the picture may come out blurry because there's not enough available light for a faster shutter speed to get an acceptably sharp picture.
1helpful
2answers

The picture frame still scrolls pictures but the pictures are very dark and unable to be seen well. Is the frame ruined?

Hi, Don't put screen in direct sun light or bright light. Bright lights will destroy LCD screen. The LCD screen has some adjustments on back. You might be able to readjust picture brightness.
Good luck.
0helpful
1answer

I mistakely deleted pictures from my camera (Kodax Esay Share M340) Move picture to internal memory.How can i get the pictures back

If Try one or more of the following

Ready light does not turn on and the camera does not work.

Ready light blinks green.

  • Camera is operating normally.

Ready light blinks amber.

  • Wait. Resume picture taking when the light stops blinking and turns green.

Ready light blinks red and camera turns off.

Ready light glows steady red.

Ready light is off or glows steady green.

  • Camera is operating normally

1helpful
1answer

How does the light affect to the picture? Rules or

Photography is the process of making pictures (graph) using light (photo)...
Light takes the most important role on produce nice pictures

There`re no fixed rules about photography, it`s an art so nobody have rights to say that the photo is good or bad...

During rainy day, you should prepare camera`s water-proof jacket or an umbrella to protect it against water. Some expensive cameras have been equipped with water-proof material.
0helpful
2answers

I have a Fuji FinePix A330 camera and when I try to take a picture in the light, daylight or lamp light, lines appear through the picture. Sometimes fine lines but other times like a burst of light. This...

I have a Fuji FinePix A330 camera and when I try Problem with the Fuji FinePix A330 Digital Camera I have a Fuji FinePix A330 camera and when I try to take a picture in the light, daylight or lamp light, lines appear through the picture. Sometimes fine lines but other times like a burst of light. This just started happening recently. But when I take a picture in the dark with the flash the photo turns out fine. Any answer as to what caused this? Thanks
3helpful
1answer

The picture goes off, the power/standby light

Sony KDF-60XS955 picture goes and power/standby light light flashes


Hi,

Most likely you have bulb failure. First step in troubleshooting is "Change the Lamp or Bulb". Lightning, power line bumps and collisions with vacuum cleaners can all shorten lamp life. Rough handling in shipment can also happen without your knowledge.

+90% of all Sony LCD Rear Projector "No Picture or Intermittent Picture" faults are related to bulb failure.

If new lamp does not improve the situation, then hands-on troubleshooting by someone that has parts and knows how the unit works is the only practical remedy.

easyab


0helpful
2answers

Canon Powershot SLR takes fuzzy photos

Guys,
you need additional flash or brighter light to click in low lighting condition. In order to compensate for low light conditions, the shutter goes slow and therefore you get fuzzy pictures.

Another way is to click on movie(video) mode and then atleast you can see them moving around as well as while editing, you could take out some pictures from the video( though on lmuch ower resolution).
0helpful
1answer

Phillips magnavox 50" projection TV shows a light picture

it sounds like the tv is going out. you might call a repairman before it does so you dont lose the tv.
1helpful
1answer

Pictures reddish or orange

Although normal room lights (tungsten lights) appear white to our eyes, their light is actually much "warmer" than daylight, giving a reddish or orange color to pictures. This happens with digital and film cameras. To prevent or lessen this reddish or orange color: If your digital camera has a selectable White Balance mode (check your camera's User's Guide) and you are not using the camera or external flash, set the White Balance mode for "Tungsten" light. If your pictures are reddish even when you use the camera flash or external flash, the room lighting is overpowering the flash. Try setting the White Balance mode for "Tungsten" and continue to use the flash. If your camera does not have a selectable White Balance mode, use the camera flash or external flash when taking pictures in lighting that makes your pictures turn out reddish or orange. If you can, turn down or turn off one of the room lights (without making the room too dark), or move your subject so that it is not being hit directly by the room lights. If you can, when taking pictures in the daytime, try opening any drapes that might be covering windows. Letting in natural daylight improves the color quality of the lighting.
Not finding what you are looking for?
Kodak EasyShare One Digital Camera Logo

Related Topics:

69 views

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6394 Answers

Brad Brown

Level 3 Expert

18854 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...