Question about Marantz SR8001

1 Answer

I have a Marantz SR 8001. The front display lights went completely out, but the blue lights over the selector knob, volume knob, and the HDMI blue light comes on. I was setting up a Logitech 1100 remote with the PS3 adapter and poof the lights went out. I grabbed the Marantz remote and hit the display button but nothing worked. I turned the receiver off and unplugged it and still no display. Any ideas?

Posted by cgross67 on

Ad

1 Answer

Kazim ERGUNEY

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 577 Answers


Hello,
You have a nice piece of Stereo...I believe you have mistakenly selected the" display mode OFF" function..,Here is the info that you can reactivate it..
If you need a soft User Manual here is the link for it too..

Take care and please
Remember to rate/vote and give me 4 Thumbs Up
for Helping out the Community :)...please insert some words in "
My Testimonials "
Hope this helps!

------------------
" display mode OFF"

You can select the display mode for the front display
of the SR7001.To select this mode, press the DISPLAY on the remote control or the front panel.When this button is pressed, the display mode is switched in the following sequence.Input Mode ? Surround Mode ? Auto display OFF ? Display OFF ? Normal Mode ? Input Mode Normal Mode: Displays the selected input function. If the function has been renamed using the Function Rename feature (see page 26), the renamed name appears on the display. Input Mode: Displays the input mode set via the Function Input Setup feature (see page 25). Surround Mode: Displays the status of the selected surround mode. Auto Display Off mode: The display is off. But, if you make a change to the unit such as the input or surround mode, the display will show that change, then go back to off after about 3 seconds. When changing the volume, it is not displayed. Display Off mode: The display is off completely. Note: • Only the DISP indicator will be illuminated on thefront display in display off condition
http://www.scribd.com/doc/53431794/Marantz-SR-8001-Owners-Manual

Posted on Jun 23, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi for some odd reason my Marantz sr 5006 is completely out of control I can't turn the volume up or down I tried resetting it several times what might be causing this


If it is a twist type knob that regulates the volume control they can often brake so you will need to take it off to inspect it you can do this by pulling it directly towards you ( a small screw driver placed behind it can help to get it off ) then you will be able to check to see if it is broken or not or if you can then control the volume by turning the shaft that the knob was meant to be attached to , a small amount of epoxy glue should fix the knob back onto the shaft if this is the problem .

Oct 18, 2017 | Marantz Audio Players & Recorders

1 Answer

Marantz SR-7200 volume -29dB blinking


Check Speaker connections at BOTH ends and double check to see that they are on the right terminals.

If you need a manual . the Marantz site will have one . PLus they may have FAQ notes for that receiver

Cheers

Mar 01, 2014 | Marantz SR-7200 Receiver

1 Answer

Green screen


Try to reset to your Marantz to factory settings, or try the newest Firmware. :)

Jan 21, 2014 | Marantz Audio Players & Recorders

1 Answer

I have a marantz sr 7001 amp and am running canton 4ohm speakers to front and centre should my amp get really hot and go into protect mode when I am giving it some serious volume


it is not made to drive 4 ohm loads.also if you measure the impedance on the speaker,at some frequencies,it is closer to 3 ohms.This will cause the amplifier to shut down.Today's amplifiers are embellished specs.the old marantz 2325 was 125 watts a channel and weighed 80 pounds.It would eat alive some of the 1000 watt home theater amps of today.Marantz is very nice stuff.

Jan 03, 2011 | Marantz SR-6300 Receiver

1 Answer

I have a Marantz SR-5600 surround Receiver. It has been shutting off the volume at various intervals recently. When I attempt to turn it back on a display reads " Check POW5


The POW5 fault indication means that the 5Volt power supply grid is not OK. The unit needs to be repaired by a professional repair engineer. No user servicable parts inside.

Jul 19, 2010 | Marantz SR-5600 Receiver

1 Answer

Marantz sr8001: standby light blinks rapidly,


Hello there Ed.

For anyone that has ever had such an issue with a MARANTZ SR series (6001. 7001. 7002. 8001...etc...) issue a question and I do HAVE the answer.

I could be just anything, or just the low quality binding posts used by MARANTZ for that.

Please describe to me in details how you've connected your speaker wires at the back, and give me description when and how did this problem came up.

Kind regards
Evangelos

Oct 17, 2009 | Marantz SR8001

1 Answer

Marantz sr7200


most likely the audio pre amp & volume control chip

Sep 27, 2008 | Marantz SR-7200 Receiver

2 Answers

Volume control problem


bring good contact luricat cleaner from near radio shack and apply it over volume and move it forward and backward many times.

Jun 21, 2008 | Marantz SR-5200 Receiver

Not finding what you are looking for?
Marantz SR8001 Logo

1,986 people viewed this question

Ask a Question

Usually answered in minutes!

Top Marantz Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76455 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Marantz Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...