Can not set the camcorder to Super Nightshot Plus mode

This has jammed, remove recording tape and perform reset.

Option 1:

Using the NightShot:

1. First Set the POWER Switch to Camera, Slide NIGHTSHOT to ON.

2. The NIGHTSHOT indicators flash on the screen.

3. To cancel the NightShot mode, Slide NIGHTSHOT to OFF.


Option 2:

1. Let us try to reset the Camcorder and check if it helps to resolve the issue.

2. Locate the RESET button behind the LCD screen of the Camcorder.

3. The Camcorder should be switched ON when you reset the unit. Press the RESET button using a sharp-pointed object.

NOTE: Resetting the Camcorder will reset the settings of the Camcorder to the factory settings including date and time. It will not delete any data saved in the Camcorder.


Good Luck!!!!!!!!!!!!!!!!!!

switch to MANUAL mode, then in SHOOTING MODE select NIGHT or TWILIGHT

Hi,
Below image of CCD-TRV608 shows NightShot Button location, turn it Off for normal mode recording.

1. Open this link to the user manual.
2. http://pdf.crse.com/manuals/2661364112.pdf
3. Go to page 42 of the manual. The picture shows switch #1, which is on the top of the camera. Move this to OFF. This will remove the Nightshot.

Night Shot option can be OFF by switch at top of camera.

This is the solution, I would only add that it's on the top of the camera itself. Not in the digital menu or backlight button. On my older version, it's between the cassette and lens sections of the camera. 
Never having used the nightshot before, my sister left me with the same quandary... 

it should be right on the top of the camera. the big switch. its not in any of the touch screen menus

For the "all white screen" in daylight problem, check to make sure the "Nightshot Plus" slider switch is set on "off."

Maybe your blacklight is on. Hope that helps.