Light stays red, will not switch to green. I hear no sound from the subwoofer

Little late I know, but.. when you power off the tv it SHOULD turn off about 25 seconds later. Assuming thats how you have it hooked up is directly to the tv.

I have sub woofer that works the same way. It is always on "idle" but when it detects an input it switches over to fully powered status and green light goes on. When I turn off receiver or whatever, it takes a tad for the unit to power down and go back into "idle" mode with a red light. .

sounds like you have a short somewhere , Or bad relay switch

It sounds like the sub has an auto power mode, hence why it switches to red (off), so your system will not detect it. If there is any control to switch it on all the time do so and try it again. It must be green all the time during the test.

My Loewe did the same thing tonight. The picture went blank and the rered and green light came on together. Any suggestions?

Sounds to me like the amp is going into protection mode. Try placing one sub on the amp with very little gain. One of the biggest reason why this happens is because the subwoofers are wired wrong. What is the brand and model number for your amp?

please refer user manual once agailn. and below url
http://www.bose.com/controller?url=/shop_online/home_theater/21channel_systems/cinemate_systems/cinemate_series2/index.jsp

Disconnect its input cable to see if a true lack of signal lets it go to sleep. If not, it has a bug. Otherwise, you probably have some sort of signal present on the sub cable.

Hello jmw3031,

The Basslink should have both a red power LED and a green servo LED. The red LED should be on when power is applied. The green servo LED should only come on during high-level bass transients. Turn the gain down slightly if it stays on for extended periods.

Hope this helps.

I have a similar issue too, but my problem is that the sub has green light, and my control pod has an 'off' light, but it won't turn on :(