Service mode of bizhub c280? - Konica Minolta Office Equipment & Supplies

Is the code C-B163?

GO to below web site down load the free scan manual for your model. Self Help Product Support Konica Minolta Business Solutions Inc

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

What is the code what is image like on the print can run stablilize in the service mode

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

no such code in the service manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

replace the cyan and magenta image units

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

call your tech services rep, he will tell you in detail what you are asking..........
have a good time,,,,,

if you are asking complete procedure, then its not easy to understand like this.you should call technical service representative for assistance........... thanx

You didn't mention the size of the job size, but it sounds like a memory problem. If you have a service contract or it's still under warranty, contact your rep before you start opening things up.

The following is if you don't have a service contract. If the bizhub has been working with no problems in the past, try reseating or replacing the RAM. I've had to replace RAM that started causing problems on classroom computers. If you bought it refurbished (used) check to see the 2GB RAM that supposed to come with the bizhub hasn't been removed or replaced with smaller memory.

Try 12345678.  That worked for me for my Bizhub C250.