Monitor just flashes off and on - ViewSonic VX922 19" Monitor Flat Panel

Hi,
I think your problem is "when you trying to view the captured video in the monitor you have only got the flashing monitor" Just check your cable and memory. If you don't have enough memory or else if you have any wire problem then you may get this type of flashing monitor.
source:- http://www.spy3k.be/lichtschakelaar_camera.html

Your monitor is bad and needs to be replaced. Try connecting another monitor to the computer just to verify that it is the monitor and not the video card inside the computer. Borrow a monitor from a neighbor, friend, relative or co-worker and connect it to the computer. If the Borrowed monitor displays without flashing, then your video card is good but your original monitor is bad. If the Borrowed monitor flashes the same way as your original monitor then your video card inside the computer is bad.

Look for bad caps in the power supply first, post back what you see inside so we can guide you furhter, see example of failed monitors due to bad caps, lamps: http://s807.photobucket.com/home/budm/allalbums

hi, i have the same problem...any solution?

The problem may with the Ram inside your computer

When the monitor is flashing, is the flashing coming from the middle and going up and done to fill the screen. If so, probably capacitors in the monitors power supply are leaking and need replacing.

Blown capacitors internal to the monitor they can be replaced by soldering.
let me know what you want to do

Next time you reset, check both the monitor settings and your BIOS settings for wake up

When the menu is displayed on the LCD monitor,
pressing the LEFT button makes the cursor shift to
the left tab.
■ When the menu is not displayed on the LCD
monitor, the LEFT button operates as the FLASH
( ) button.
● Selecting the flash mode
1. Rotate the MODE DIAL to select a RECORDING
mode with the exception of MOVIE CLIP mode.
2. Press the Flash button until the desired flash mode indicator displays on the
LCD monitor.
3. A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.

Sounds like you have a bad connection from your monitor to your computer. First check and make sure the connection between them is tight. Does your computer boot up and run though? If your computer is not booting up the monitor will default back to the flashing green power light