When i insert my moden in a laptop gives a response of usb device not recorganised.

If you are inserting the USB into a PC and it does not automatically recognize it go to "My Computer" then look for it there under "Devices with removable storage"
Click on the device and that should allow you to access you have on that USB.
If you are installing hardware with a USB connection, then you may have to go to the "Control Panel" then look for "Hardware and Sound" then "Devices and Printers" and then you can either install the device or the printer from there if you have the software for it.

When you plug a mass storage device in a USB or other ports, the OS gives it a drive letter E,F,G, H. I ... If you insert it another time it will give it a drive letter that may be different from the previous one because some other device plugged in has that drive letter. It may also happen if you change USB port.

So if you created shortcuts that pointed to one device that had driver letter G, they are no longer be valid if when you inserted it again the OS refers to the device with another letter.
Insert a device in the same USB port. If you have to plug in many devices try to plug them in in the same order. This may save your shortcuts, but there is no guarrantee it will be so.

If you are looking for a file you know is on a device, just use the Window explorer and point to it.

Well theres one of two problems here, the device is either not working properly or your usb port/card may be shot... Either or try using other usb ports and if this issue continues then try it on another computer...

insert CD with drivers and go to DEVICE MANAGER ,,update USB driver if you hace CD ,,if not ,,then go to internet and download USB driver for your model of PC ,,LAPTOP and OPERATING SYSTEM

What kind of flash drive and computer are u working with? Let me know and I may be able to give u a more accurate answer. Try inserting another device in that USB port and check to see if ur computer is recognizing it in your device manager. Click on Start Tab then Go To Settings , Control Panel Then Click on System Icon , Then Click on the Hardware Tab and Click on Device Manager, scroll down to see if there are any yellow question marks or flags? Leave that Device manager window open and try to re insert your flash drive again and see what response u get?

Ports are need to be re soldered or replaced.

I think what you are talking about is that the usb device could run faster if inserted into a USB 2.0 slot. If your computer does not have USB 2.0 (which yours does not) you will just have to live with a tad less speed when transfering files to the usb device. No beg, and you probably would not notice the difference.

Please rate this response.

Thank you

u will need to buy a usb cord that fits into the modem to the laptop also you may require the moden software to install the usb cord

What kind of flash drive and computer are u working with? Let me know and I may be able to give u a more accurate answer. Try inserting another device in that USB port and check to see if ur computer is recognizing it in your device manager. Click on Start Tab then Go To Settings , Control Panel Then Click on System Icon , Then Click on the Hardware Tab and Click on Device Manager, scroll down to see if there are any yellow question marks or flags? Leave that Device manager window open and try to re insert your flash drive again and see what response u get?

go to the link below for the manual http://global.msi.com.tw/index.php?func=downloaddetail&type=manual&maincat_no=1&prod_no=181