TV problem My TV keeps flashing red on standby can you help me Same problem with my P42HHA10S. LED flashes red.

There are particular blinks meaning on sony TV. I can give you the problem from your sony tv if you specify or count how times the LED flashed.

It seems there is no information in the manual here http://www.finluxdirect.com/content/ebiz/shop/resources/pdf/46S8030-T.pdf
So you may want to attempt to talk to their support. They have free on line chat here Finlux Direct Help Centre

Good Luck

The fan should run for a few minutes after shut off to cool the lamp down.

If I read and understand correctly somewhere in the cycle you are getting 5 red blinks? that is an error code........

Either you or I can Google the model number of the set with 5 blinks.....or visit the Sony site to see what it means.....

Sony TV LED & Blinking Codes - What Does It Mean When Standby/Timer Light Flashes Sony has provided a "self-diagnosis function" with your TV, that in the case of abnormalities or problems the LED or red blinking light on the Timer/Standby indicator flashes a number of times to indicate the issue.
when there is trouble with your Sony Television set -- it indicates the issue in either the diagnostic mode, or even more commonly by flashing a series of LED blinks or flashes on the front of your television. Each set or frequency of the blinks indicates a very specific problem with the television itself.
Sorry but unless you may be able to repair the television set yourself , please call a local repair shop to the have a repairman sent out,,

Take care and please Remember to rate/vote for us to
continue for Helping out the Community :)

A Flashing Red ON/STANDBY LED means one of the following
2 Flashes - The internal temprature is high. Check the air holes are unobstructed.
4 Flashes - The fan is broken
6 Flashes - The internal electrical system has failed.
There is no entry in the manual for 12 red flashes.

crazyford359
Your Thermal fuse is out. I just replaced mine, the part is only $4.85 on Sonyparts.com. Ordered (2)

The LED used in most tv are dual color led,some have two lead, some have three. try to find the same size and replace it.

Problem: Need Sony manufactures code for the Sky remote.

Solution: Your TV Code for Sony is 0000

1. Turn on your TV.

2. Ensure that the front of your Sky Navigator is closed.

3. Press "tv”.

4. Hold down "select" and the red button together for about two seconds, until the red LED on the Sky Navigatore flashes twice.

5. Press "tv" again.

6. Key in the four digit code for your brand of TV. The LED on the Sky Navigator will flash twice. If the LED illuminates only once, re-check the code for your brand of TV and start again at step 5.

7. Press the standby button on your Sky Navigator. If your TV switches off, press "select". The LED on the Sky Navigator will flash twice. If your TV does not switch off, press "tv", then press the standby button.
Repeat this (press "tv", then standby button) until your TV turns off,
then press "select".

If you are still experiencing problems, please telephone for technical
assistance. you will find the "Technical Help" telephone number by
pressing "services" and selecting "Telephone Numbers".



The help given is based on information taken.... Hoped this has helpd you

All I got out of FixYa was a link to the Fujitsu web site. Waste of money really.

I have since taken it to a local technician and paid over $600 to have the power supply replaced.

Probably should have saved my $15 - $20 and done that in the first place......live and learn.