Motor burnt out model uln-b195btp-11 looking for spare part

If you remove the motor and match it with a generic motor or contact a spares department and ask them if they can sell you one.

you should be covered by warranty if it still new.
If you know the brand, model you can perhaps look for the service manual to look for fuse, blown components or a spare part.

Need more info is it 11" one blade? Is the blade fixed pitch or CCCP? If fixed pitch is it clockwise or counterclockwise rotation? and many more.Post make and model of unit or google spares for you model.

look for spare part and replace it. Several site which sell spare parts.

If you already have a lot of attachments for this model, I would purchase a used motor unit. I got a complete setup at a yard sale minus the work bowl cover for $3 as a spare, and often see them at thrift stores priced quite inexpensively. You could also check ebay. Motor units routinely go for less than $25 including shipping. I'm pretty sure most dcl-8 series motors will work with you bowl and attachments. I like the quality of the older units better than the newer ones. And if you watch ebay closely, you can pick up a lot of pieces really cheaply. Good Luck,

Marc

check online: Appliance Partspros

sounds like a sealed system problem.

inspect control board behind control panal
look for burning
resister r- 11 is burnt

relay problem

is this a front load?check the circuit board on top console look for a burnt R-11 on board ;replace control board & wax motor
Top load I need a model number.