How to solve frame width error on brother M-4318 printer

There are steps to solve brother printer error code 76. Go through these steps and solve this brother printer. No single step is hard to implement. Read and go-ahead to implement on your device.
Step 1:-Firstly, Turn of the Brother Printer
Step 2:- Then switch on the Brother Printer device while keeping all the way down to the "menu" button until all the led are flashing On/Off. Now you are in "protection" mode.
Step 3:- Next, press "eighty" button.
Step 4:- Then press the "mono begin" button several times till you see for elimination: xxxx
Step 5:- Next, press "2783" button on the way to reset the purge counter. You will see removal: 0000
Step 6:- Then press the "stop" button.
Step 7:- Press "ninety nine" to go out the protection mode.
Now test the error is resolved.

Connect to Brother Printer Customer Support Number + 1-888-209-3034 to remedy Brother Printer Error Codes with instant troubleshooting results. Brother Printers is one of the most affordable printing and imaging solutions that delivers the exact printing you need to be successful. For all types of professional and personal work, Brother Printers are highly reliable. With its high-end performance, Brother Printers is designed with modern technology to meet the needs of modern generations. But when Brother Printer stops performing the way it used to be, there are times. To fix error messages from Brother Printer in the most efficient way,Brother Printer support service provides the most reasonable price possible with world-class technical support. We offer the most efficient and user-friendly support services with the help of high-end remote access technology to make troubleshooting feasible for all. Connect to Brother Printer Error codes and messages in less time possible by phone number or live chat services.
For more help visit :- fix Brother Printer Error Codes and Message https://www.brotherprintersupport247.com/fix-brother-printer-error-codes-and-message

i haver Brother Laserjet DCP 7055 printer. Once i refilled its toner but now on 2nd time i refilled it the printer is gives an "Toner Ended" error & replace the toner message.... Pls help meto solve it... Thanks lucky bareilly

The problem might be with stuck 'pins' in the head. Pins stuck due to clogged ink.

1) Wait until the print head is cool if you have been printing.

2) Place a drop of Isopropyl Alcohol on the front of print head (where the pins are located).

3) Wipe the head with a swab. If the swab becomes dirty, it indicates there is dirt, mainly clogged ink. Use a new swab to clean.

4) Start printing something immediately and check.

When you press and hold down the Button will it give you a test print. Have you down loaded the latest drivers from brother.com.. Also does it do it with all programs.

You get this error code due to defective or failing paper width sensor . The sensor located just to the left of the Print head Assembly, is the Paper Width Sensor.
Even after replacing the sensor if you receive same error . You need to replace the print head as a whole .

Hope this helps.

Thanks for using Fixya.

check settings for paper in your panel first..

here's a good link for drivers


check here for fresh set of printer drivers