Ryobi 30cc 17" String Trimmer Zrry30530 Wcurve Shaft Logo
Posted on Jun 08, 2011
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

What is percentage of oil for Ryobi cs 30 - Ryobi 30cc 17" String Trimmer Zrry30530 Wcurve Shaft

1 Answer

Roy Cagle

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Ryobi Master 1,545 Answers
  • Posted on Jun 08, 2011
Roy Cagle
Ryobi Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: Feb 01, 2009
Answers
1545
Questions
1
Helped
913731
Points
4781

Fuel/Oil Mix ratio is 40:1. That is 3.2 oz oil per gallon of gas, or 1.6 ounces of oil/ half gallon of gas. I highly recommend using a good synthetic 2 stroke oil. Many benefits there.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How do I get a user manual for a Ryobi CS-3635/ Thanks!

RYOBI contact telephone number in South Africa at the internet link below. For other countries, there are also web sites for RYOBI.

https://ryobi.co.za/#contact
0helpful
1answer

What oil the machine take ryobi cs 3835

2 cycle engine oil for the gas mix
0helpful
1answer
0helpful
1answer
0helpful
1answer

I have a Ryobi electric chainsaw 300m, model CS-300, chainsaw oil is not flowing, what can i do to DIY. tks

The oil line plastic has hardened and come off. You will need 150mm 3mm plastic tube. Dismantle and replace the hose between the reservior and the pump
7helpful
2answers

Does a Ryobi trimmer S430 not use a fuel mixture?

the Ryobi S430 is a 4 cycle engine. As such it has an oil reservoir which takes 30 weight oil. It uses straight gasoline in the gas tank.
0helpful
1answer

I can pull my string from a ryobi cs 30 and it wont go back

Either the rewind spring is broken or the starting spool is stripped. Either way you have to open up the entire unit. Check those two things and good luck...Lee
0helpful
2answers

Cant pull the rope but when you take the spark plug out the rope will pull

Sure its the correct spark plug? Sounds like the piston is coming in contact with the spark plug.
5helpful
1answer

What is the ratio of gas and oil mix for a ryobi 31cc trimmer

just use about 3 to 4 ounces of 2 cycle oil per gallon and you should be fine. a little extra lubrication wont hurt it
5helpful
3answers

2006 ford exsplorer oil light did not go off after a oil change.

In the owners manual, you will find reset procedures.

I found this for ya, hope it helps!

Please Rate!

Oil Change Reset
A press of the OIL CHANGE RESET switch will allow you to
reset the oil life feature to 100% (or your Personalized Oil Reset
Percentage). After you have the oil changed, you must execute
the following procedure. Press the OIL CHANGE RESET switch
and hold for five seconds as the M/C counts down for five
seconds. After a successful reset the Message Center will display
“OIL LIFE RESET TO 100%.” If you have established a
Personalized Oil Reset Percentage, the display will show that
percentage instead of 100%. To ensure accurate oil life
indicators, perform this reset procedure only after an oil change.
Your Personalized Oil Reset Percentage allows you to establish a
smaller oil change interval than the manufacturer’s
recommended interval. To establish your Personalized Oil Reset
Percentage perform the following procedure:
1. Press and hold the OIL CHANGE RESET switch and press
the RESET switch while the display is still counting down
the 5 seconds to reset. The display will change to “START
OIL LIFE AT XXX%.”
2. Press the OIL CHANGE RESET switch until the displayed
percentage is the Personalized Oil Reset Percentage that you
desire. Your choices are 100%, 90%, 80%, 70%, 60%, 50%,
40% and 30%.
Not finding what you are looking for?

206 views

Ask a Question

Usually answered in minutes!

Top Ryobi Garden Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

john h

Level 3 Expert

29494 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

Are you a Ryobi Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...