Question about Psi 2500 Mobile Pressure Washer 5hp Honda Engine
You may have a clogged main jet in the carburetor, remove the engine shroud to expose the carburetor, the carburetor will be held on in most cases by tow bolts and then a basket underneath, remove the carburetor and flip it over in a rag to catch the fuel, then remove the screws holding the fuel float bowl on, carefully work the bowl loose to avoid tearing the bowl gasket, if you do damage it you will need a carburetor repair kit. Once the float bowl is removed remove the floor and the needle valve at the fuel inlet, set them aside, using a can of spray carburetor cleaner spray the inside of the carb and then blow through the jets with compressed air to dislodge the dirt (this is a must) that is obstructing fuel flow and causing the lean stall out, reverse and reinstall you should be good to go.
Posted on Jun 08, 2011
Tips for a great answer:
Oct 10, 2012 | Karcher 2500 PSI Pressure Washer
Sep 16, 2012 | Garden
Jun 22, 2011 | 1990 Ford F250
Nov 06, 2010 | Psi 2500 Mobile Pressure Washer 5hp Honda...
Aug 08, 2010 | Honda 50 W Ar Pump 2500 Psi 25 Gpm...
Aug 10, 2009 | Karcher 2500 PSI Pressure Washer
Feb 05, 2009 | 1990 Jeep Wagoneer Limited
Nov 05, 2008 | Karcher 2500 PSI Pressure Washer
Nov 02, 2008 | Karcher 2500 PSI Pressure Washer
May 12, 2008 | Karcher 2500 PSI Pressure Washer
2,112 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: