Had a power outage during a lighting storm and now the GE spacemaker phone/unit does not work; it's showing in the display screen "Initializing". The phone works, but when you press any of the buttons on the unit, it doesn't change the display screen. I have checked all other appliances, TV, DVD players etc, and they are all working okay. I have unpluged and repluged back in, but again just come up with the same thing. I have checked the manual, but cannot seem to find anything that will change this. Please advise

SOURCE: Beep During Conversation

i want how frequently it occurs if it occurs always or sometimes like 1 in 10 times like that and which country you are who's ur provider

SOURCE: Ge cordless 900 mhz home phone

What is "Bell" and "Cogeco"? Did you change phone line provider companies? If so, you would need to ask them if it's possible to change. You are getting the information they are sending you. I do not believe the information is being altered by your phone.

SOURCE: whont work, please register in displayed on screen

To solve the register problem.... Put each phone for 20 seconds or so in the main base. I had the same issue, and resolved it this way.

SOURCE: Ge 25932ee1 5.8 Ghz Edge Series Cordless Phone

To solve the register problem.... Put each phone for 20 seconds or so in the main base. I had the same issue, and resolved it this way.

William Miller

• 9179 Answers
• Posted on Oct 22, 2007

SOURCE: Dead GE Spacemaker

A microwave can be dead for many reasons.

If it goes dead for a while during or after cooking then comes back on, the magnetron is probably overheating and causing the thermostat to open.

When it cools, it closes the circuit and allows power through again.

If it's random, it may be a bad connection, usually on the control board or fuse holder.

If it went dead almost immediately after pressing the Start pad, that's usually a shorted high-voltage capacitor.

If it went dead a few seconds after pressing the Start pad, that's usually a failing high-voltage transformer.

If the fuse is good, it may be an open thermostat or thermal cutout on or near the magnetron or on top of the cavity / body of the oven.

If you or a friend decide to look into it, we have critical safety information and disassembly information at our site, linked here on Fixya: http://tinyurl.com/yzjozk

You can find helpful exploded view diagrams and order parts by entering your full model number here: http://tinyurl.com/gv383