Question about Neff 24 in. S5456 Built-in Dishwasher

2 Answers

Neff dishwasher takes 3 hours, fails to dry dishes

Choosing different programmes and using reset buttons make no difference. Just out of warranty, moderate use. Any suggestions welcome, thanks.

Posted by HeBrewEG on

  • Anonymous Mar 29, 2009

    fails to dry... gets pretty hot but doesn't steam like it used to

     also pans are getting kind of white looking  



2 Answers


  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Mine has just started to do the same thing.... not sure why :o(

Posted on Dec 11, 2011



  • Level 1:

    An expert who has achieved level 1.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Does the water get hot during programme, if not this will be why it takes so long and does not dry?

Posted on Oct 09, 2008


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Who have purchased 2 (actually 3 but the other one was a different kind) utilitech 0050024 outdoor timers and both keep resetting to midnight on monday as of the power has gone out. All programmed info is...

Sometimes people get batches of bad timers.
However this timer does not show a program carryover, and does not appear to have battery for carryover. Although many new timer have a capacitor backup, it is unclear if the Utilitec offers this feature.
Use reset button to clear memories, and then reprogram.
This timer has 2 modes: programmable or photocell
As a general rule, these timers come with 1 year limited warranty, but unclear who backs Utilitec warranty.
Buy two new timers from different Lowes store, and return defect in new package.

If you need further help, I’m available over the phone at

Jun 12, 2013 | Hardware & Accessories

2 Answers

When i plug it in there is no display is it broken ?

Reset timer using reset button, and see if functionality begins.
Plug timers into different outlets.
Test outlets for correct polarity and that they deliver at least 80% rated value, 115 volts x 80% = 92 volts.

Most timers have 1 year limited warranty through manufacturer.
Timex timers are not made by or display on Timex website.
Unknown where warranty is honored.
Suggest GE, Woods, Intermatic timers since these have specific web links for warranty coverage, but you have to send timer in.
This is why I suggest buying timers at local box store, then if problem occurs, buy another timer and return defect in new package, thus giving convenient extended warranty coverage.

If you need further help, I’m available over the phone at

Nov 23, 2012 | Day-Timer Mwave Tx12626x Timex Electronic...

1 Answer

How to reset kodak easy share m552

In the live-view or review mode press the DISP button until tools appear at the top of the LCD.Using the arrow buttons (Up and down, left and right ) allows you to select the different settings available for the camera and press the OK button to activate the setting.To Reset your camera you should select the option ' Reset All Camera Settings ' from the available settings and press OK.This will reset the settings to their default values.Hope you're satisfied with my solution.Thanks for choosing Fixya.

Mar 31, 2012 | Cameras

1 Answer

Playstation 3 turns on but does not show on screen

There could be a few different things causing this. If you are sure that the cables are all hooked up properly and the TV is on the correct input, I'll make some suggestions. The simplest solution could be that the ps3 is outputting a signal that your tv can't display. The way to reset this is to hold the power button (not the rocker switch in the back but the button next to the eject button) for 5 seconds or so. You should hear 2 beeps. This will reset the display settings. If this doesn't do the trick and you have the ability, try a different cable. Try the ps3 on a different tv as well. It could be that the TV may need a firmware upgrade.

If all else fails you can always call Sony PS support at


font.f1 {font: 12.0px 'Lucida Grande'; color: #000000} --------------------------------------------
I hope this helps! If this did help you, please give a thumbs up!

Thank you for choosing FixYa!

Jun 28, 2011 | Sony Playstation 3 (PS3) Console

1 Answer

Lights flash on and off when car is turned off and i go inside house. also my 1995 buick lesabre will not start

Thanks for choosing FixYa and welcome to the site. This may be your security system going off. If it is, it can cause the car to not start. It may need reset. Refer to your owner manual for directions as each car has a different code. If you can't find it, you may need to call the dealership. If you have any questions, feel free to ask. Thanks for using FixYa.

Apr 07, 2011 | 1995 Buick LeSabre

1 Answer

2001 dodge caravan's engine light just came on, but it has been shutting off every 5 seconds when pumping the fuel. Changing position of pump doesn't seem to make a difference. Any ideas?

Thanks for choosing FixYa and welcome to the site. Since your check engine light is on, you need to try and get a code off your computer. It may show what the problem is. Have you checked your fuel pump fusr/relay or reset button, if equipped?

Apr 06, 2011 | 2001 Dodge Grand Caravan

1 Answer

My Keurig does not dispense enough water for any of the settings. Is there something I an doing wrong or that I can fix. Thanks

Hello Gajaxson,

I understand that your coffee maker/Espresso machine is not putting out enough water when you are brewing. This is a common occurrence when the machine needs to be descaled.

There are many different ways to descale coffee/espresso machines and some have cycles built in that you have to add the solution and push a button. Would please post me a model I will check with and see if the manufacture has any suggestions on how to descale your machine. Also if you still have the owners manual it will show you how to descale your machine.

It is recommended that you descale your machine at-least once every six months for moderate use and once every three months for heavy use.

Thank you for choosing


Mar 13, 2011 | Keurig Coffee Makers & Espresso Machines

1 Answer

Compressor will run for a minute or so. Then it will blow a breaker and then it wont run again after the breaker is reset.

Hi, my name is John. Welcome to FixYa. Most of these compressors run on 15 to 20 amps service depending on the size. Try a different outlet and see what happens. Thanks for choosing FixYa...John

Nov 22, 2010 | Campbell Hausfeld Air Tools & Compressors

1 Answer


Hi and welcome to FixYa. I am Kelly.

Suprizingly enough there is an abundance of manuals for your Honeywell Programmable Thermostat. Use this link and at the bottom of the page you can download any of the manuals.

Just note that pop ups must be enabled to download the manuals

Printable Quick Reference Sheet (after download)

Thanks for choosing FixYa,


Oct 15, 2010 | Honeywell Programmable Thermostat Heater

1 Answer

Digimate 26inch widescreen LCD HD ready TV My mom (92yrs) was watching her TV last night when it just went black. She thought there was a local power outage but there wasn't one. I've tried everything,...

Hi Fix Ya; Well, to be honest, I went to DIY dot com and posted my problem there and the moderator came back and told me how to fix it. But thanks anyway for your offer.

Aug 11, 2008 | Televison & Video

Not finding what you are looking for?
Neff 24 in. S5456 Built-in Dishwasher Logo

Related Topics:

1,586 people viewed this question

Ask a Question

Usually answered in minutes!

Top Neff Dishwashers Experts


Level 3 Expert

13434 Answers


Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18342 Answers

Are you a Neff Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides