I have a DMP-BD55 blu ray player. I want to connect it to this internet. I have wireless in my house. CAn I connect this DVD player to my wireless internet?

HI HOPE THIS HELPS
http://www.resettoo.com/reset-panasonic-dmp-bdt100-blu-ray-player-to-restore-factory-settings

Please clarify your model number. If you have the DMP-BD60, it only has wired networking capabilities. A USB wi-fi dongle will not work (the USB port is only for storage devices). If you are connecting it to a wired port on a wireless bridge (switch) or directly to your wireless router and having trouble with the connection, check your cables and that your network is up. Next check that you have not restricted the number of devices allowed to connect to the router. There are ways to limit the number of IP addresses in the router setup. If you allowed 4 addresses and the blu-ray player will be number 5, you need to adjust the settings for your router.

Please add a comment with the model number if you are using a different blu-ray player. I hope this helps.

Cindy Wells

Check your router to make sure it's broadcasting a wireless signal. If it's not, then reset it by unplugging it for 5 seconds before plugging it back in. There should be a light that comes on that indicates wifi is enabled. If that doesn't work then check your router's wireless settings. If it's not the router, then check the wireless settings on your blu-ray player

I pulled up the specifications for the bd85 Blu-ray player. It says below that it has an rj-45 network connection. That means, although it says that it is WiFi ready, that it requires an additional WiFi Adapter of some sort to operate with Wifi. Or you could connect it directly to your router or switch using rj-45 cable.

---

Experience original movie quality with the DMP-BD85 Blu-ray Disc Player. In addition, the BD85 offers 7.1ch audio decode analog output, Wi-Fi Ready connection, ultra fast booting and access to various online content with VIERA Cast.
General UPC 885170000100 Number Of Discs Supported 1 Media Supported Secure Digital (SD) Video Upconversion 1080p Video DAC 12 Bit On-Board Decoder DTS HD Audio DAC 24 Bit Weight 5.70 lbs Service & Support Type 1 Year Limited Warranty BD Player Profile Profile 2.0 Slots SD Memory Card Output HDMI Interface Type RJ-45 Network Dimensions 2.19" Height x 17" Width x 9.81" Depth EAN 00885170000100 Sponsored sites

• DMP-BD85 Sale Find DMP-BD85 at B&H, Low Price DMP-BD85
  BHPhotoVideo.com/DMP-BD85
• Dmp Bd85 10+ Dmp BD85 Products. Shop, Compare and Save at Pronto.
  BD85.Pronto.com
• $180 - Panasonic DMP-BD85 Search low prices on Bountii. Great prices from stores you trust.
  Bountii.com
• DMP-BD85 Blu-ray Player Get a Panasonic DMP-BD85 Blu-ray Disc Player for Less. Hot Deals!
  www.NexTag.com/DMP-BD85
• DMP-BD85 Compare prices before you buy. We will save you money!
  FindersCheapers.com/DMP-BD85
• Dmp Bd85 On Sale Now Save on Recorders & DVD/VCR Combos. Low Prices on Dmp Bd85!
  www.Calibex.com/DVD-Players

See your message here

teidswick - did you find the remote code for the BD35? I need this as well.

Have you put in the correct region Blu Ray disc ?
Is it all disks not playing ?
Try cleaning the laser head with a cleaning disk.

enter the MAC address from the blu-ray player (should be in the main menu under connections) to your router in the wireless settings

make sure the line is good
if so the machine has a faulty network connection
which happens from time to time

The reciever you have has 5.1 inputs at the backof it.The only way to get Dolby True HD and DTS HD is to run the 7.1 analog out from the bd55 to the nad. You'll have to leave the 2 rear surround open on the bd55 leaving the remaining 6 connected to the nad. The digital coax and the optical will not transmit the hd data, only the analog out will. Run a hdmi right to your HD tv for picture bypassing your amp. this will workfine and you'll have the audio you want. You,ll have to change the input settings for dvd in your amp to 5.1 to recieve the audio.

Hi , i just purchased a blue ray dmp bd30. i wish to use it as to play cds. It is connected to my 2 channel amplifier from the audio outlets, it is connected through the HDMI connection to a Pioneer PDP-428XDA. is it possible to play cds with the plasma turned off? I have folowed the instructions which describes turning off power from the options menu, but the options menu doest display?