Troubleshooting Toshiba Satellite P205-S6267

Your LCD panel needs to be replaced more than likely. There are plenty of youtube videos if you are a DIYer, otherwise take it to your local computer shop and they should be able to fix it up within a day or two for 50-100 dollars plus the cost of the part. Good luck... you can find all your parts on ebay if you decide to go DIY

Hi Good day!!! Try fn and f9 it toggle your touch pad on/off

Thank you for using FixYa

Please accept if my solution helps you

The "worst" that could happen would be that the motherboard would either:

* not recognize/support the "large" disk-drive at all,

* would only be able to access "part" of the disk-space, e.g., the first 128GB or 256GB or 512GB of disk-space.

However, those possibilities only occurred with "older" motherboards.

Given the specifications for your computer: http://cdgenp01.csd.toshiba.com/content/product/pdf_files/detailed_specs/satellite_P205-S6267.pdf

and the fact that Microsoft Vista is pre-installed, you must have a "recent" motherboard, and it will support any serial-ATA disk-drive (500GB, 1TB, 2TB, ... ) that you can afford to purchase.

Please download your free manual by clicking on the below link:

http://www.retrevo.com/support/Toshiba-P205-S6267-Laptops-manual/id/1279dj993/t/2/

Dear Sir,

plz use this link and download restore disk for toshiba

http://restore-disk.com/restoredisks/Toshiba/ToshibaSatellite/Toshiba-Satellite-P205D-S7436-XP-Restore-Disk-243063.html


Thanks For Your Time,

Your system is consuming much power.

Go to Control Panel, Power Options.

Click "Advanced Power Settings" for your current power plan.

Under the section "What happens when I close the lid", choose "Do nothing" for both "Battery" and "Plugged-in".

Click "Apply" and "Ok".

Now, close the lid of your laptop and open it, it would restore but next time don't overload your system power.

This is common with Dell and Toshiba.

call toshiba tech support or replace

remove the keyboard the mobo battery is there you need to unsolder one end of it, lift the leg, and turn it on that way for it to clear.. you will have to resolder once done.. have the skills or find someone that does... and you're set..

find out which socket you have using sis sandra and then look at cpus that have the same socket and it will work

hold down the power button, that should power down the laptop.