Question about Xerox One Touch 2400 Flatbed Scanner
I acquired a Xerox One Touch 2400 Flatbed scanner yesterday. I had a problem installing it. I made sure it was unlocked. But when the installation problem persisted I clicked unlock to lock. Finally after a few more attempts I managed to install it. Unfortunately, I think I might have broken it now because when I tried to do a test scan a message comes up saying that the scanner is still locked and it isn't. Have I broken it? Should I just give up trying? Would be really grateful if anyone has the answer to this. At least if I know it's broken I can give up altogether! Many many thanks. Janet
I don't know how useful this is, but I say, as you just got it, take it back.
Scanner can be defective.
Ask the store to replace it with a new one, try again and see if that works.
If it does, you probably had a defetive scanner.
Make sure to unistall the old drivers before you re-install. Restart the machine after you unistall the drivers.
Good luck :)
Posted on Aug 29, 2008
This is comman problem with lower end scanner and you say its new purchase plz go for the warranty replacement its only solution and if you can open the scanner cover its is possible to check the physical condition for the lock and some time the belt in these scanner is not fixed properly may give this problem
before opening plz power off scanner and press the cover lock gentelly so may not brake them
also check for the warranty term with manufacturer for replacement
Posted on Aug 23, 2008
Turn off your computer/unlock your scanner (if it is still in locked position)/ turn off your scanner and unplug it. wait a few minutes. /Plug the scanner back in/start your computer. Is the scanner now unlocked?
(byw, did you feel as if you had broken the lock/unlock switch?)
If your scanner is not working you should probably do an uninstall/reinstall of the scanner. Do you have the original disc? This fresh install might solve your problem. Be sure to turn off all running programs while you uninstall and reinstall including your virus control.
Let us know If your problem is solved.
Posted on Aug 19, 2008
Shut the computer down.
This makes sure the message is cancelled
move the lock to -unlock
plug scanner in
tell us what happens
Posted on Aug 19, 2008
Tips for a great answer:
Sep 23, 2011 | Xerox One Touch 2400 Flatbed Scanner
Feb 01, 2011 | Xerox One Touch 2400 Flatbed Scanner
Nov 25, 2010 | Xerox One Touch 2400 Flatbed Scanner
Oct 29, 2009 | Xerox One Touch 2400 Flatbed Scanner
Apr 11, 2008 | Xerox One Touch 2400 Flatbed Scanner
308 people viewed this question
Usually answered in minutes!