Question about Canon PowerShot S410 / IXUS 430 Digital Camera
When i turn on the camera in the display there is no proper picture seen every thing is in horizontal lines. no clear picture to capture...
There is a recall for certain cameras. CCD sensor goes out, and it sounds like that might be your issue. see website, call customer support. good luck.
Posted on Aug 27, 2008
Has the camera been exposed to heat? If left in a hot car, the display gets cooked. Luckily mine was still in warranty and Canon gave me a new one. I really like it.
Posted on Aug 18, 2008
Tips for a great answer:
Apr 04, 2013 | Canon EOS 600D Rebel T3i Digital Camera
Mar 27, 2012 | Cameras
The display being hazy or blurred can be due to failure of the LCD or the CCD which is the optical sensor of the camera. So to confirm check the older picture to be seen on the display. Confirm this by checking the card on your PC. If the pictures are seen to be good, then the LCD can be faulty, fault on the linking cable or the control board.
However if the older images are seen well then the LCD is working correctly and the fault can be failure of the CCD- charge coupled device in the camera. If you have accidently exposed the camera directly to high intensity light / sunlight, then it is possible that it is damaged. Remove the battery and keep the camera aside to reset and try as a last resort. Get estimate before you decide. It will be good to have it checked at the authorised service as you do not have to run around for spares.
Please click on the link for tips to replace a LCD
Thank You for using fixya
Sep 24, 2011 | Olympus FE-310 Digital Camera
Aug 03, 2010 | Samsung S630 Digital Camera
Nov 20, 2009 | Fuji FinePix S5000 Digital Camera
Sep 27, 2009 | Sony Cameras
Jul 13, 2008 | Fuji FinePix A330 Digital Camera
Mar 11, 2008 | Sony Cyber-Shot DSC-P100 Digital Camera
Dec 29, 2006 | Panasonic NV-GS35 Mini DV Digital...
171 people viewed this question
Usually answered in minutes!