Canon pixma mp145

Canon PC-920 Black and White Copier E2 error - Questions ...

www.fixya.com > ... > Canon > Canon PC-920 Black and White Copier .. error code e7 & e2 Cannon pixma mp145 printer error code e7 & e2 E2: Reload the paper correctly and press [Black] or [Color]. E7: The cartridges are not ..

reset canon pixma mp145:

Turn off the canon printer

Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.

Hold the Power Button, release the Resume Button.

Not releasing the Power Button, double click “Resume” and release Both Buttons.

Click “Resume” for Four times

Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.

Pixma mp145 error e2 with service error 5100...

E2: Reload the paper correctly and press [Black] or [Color].

E7: The cartridges are not installed in place.

These are from the manual.

Just press the green (color) button about 5-10 seconds. Hope this help a bit.

kindly replce the catridges and reinstall the printer driver.

how cab i fix e22 carriage problem

Procedure to reset Printer canon MP145 and Canon MP160 with Error Code Message for Printer Canon MP145 and Canon MP160, you can find error code message the end of this post:
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the Stop/Reset button the specified number of time(s) according to the function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange.)note: press 4 times for waste ink counter reset.
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset
5) Unplug cable power. (for MP145 / MP150)
6) Turn Off Power. (for MP160)

Following is the procedure to reset waste ink counter Canon Pixma MP145 :

• Connected Printer to a Power source, Turn off the printer if printer on
• With the Printer power off, press the Power button while press and hold Stop/Reset button.
• When the Power led is light, press Stop/Reset button two times while pressing and holding the Power button.
• When releasing the Power button and the Stop/Reset button (regardless of order), the printer will move into a service mode. (Waiting for menu selection)
• When the on/off lights in green, press the Stop/Reset button four times to reset wase ink counter. For other specified number pressed function listed in the table below. (Each time the Stop/Reset button is pressed, the LED lights alternately in orange and green, starting with orange).
• Unplug cable power from a power source.

The number of the Reset button pressing LED Function Remarks 0 time Green Power off 1 time Orange Service pattern print 2 times Green EEPROM print 3 times Orange EEPROM reset 4 times Green Waste ink counter reset

If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

mas saya mau download canon pixma mp145 ko susah banget ci please saya lagi butuh banget..!