Question about Bosch 3.81 cu ft WFMC530 1UC Nexxt 500 Plus Series Washer
I had the same issue. I cleaned everything but the softener compartment did not completely empty by the end of the wash.
While service was here he was told to set the front legs of the washer so that it tilted a little backward. Front higher than the rear of the machine. Only about a few degrees. This did allow the dispenser to fully empty. I still believe that the underlying problem is a somewhat restricted inlet solenoid but I will see how this works for now.
Posted on Feb 25, 2009
Make sure it is the fabric softener that is not being added. Try running w/o fabric softener and see if the tray is still full. The reason I am asking is that after I run my washer the fabric softener tray is full, with water, not softener. The factory tells me it is because the water fill nozzles have realigned and overspray into the softener tray. Not a big problem, since my system is under warranty I am having them fix the nozzles and then I will know how to redirect.
If it is the softener that is not being added then check to make sure the line is not clogged. You can lift out the bleach / softener try and check for cloggs.
Posted on Oct 27, 2008
Tips for a great answer:
Jun 08, 2017 | Bosch Washing Machines
Jun 20, 2013 | Whirlpool Washing Machines
Oct 09, 2010 | Frigidaire ATF6000ES Front Load Washer
May 21, 2010 | Washing Machines
Sep 14, 2009 | Bosch Nexxt 500 WFMC3301 Front Load Washer
Jul 07, 2008 | Bosch Classixx WFL 2066 Front Load Washer
Aug 29, 2017 | Bosch Washing Machines
Feb 11, 2016 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...
Jun 05, 2014 | Bosch 3.81 cu ft WFMC530 1UC Nexxt 500...
667 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: