- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here's what to do. I've had this happen many times.
1. Open up the SD Card compartment on the Wii.
2. Open up the battery cover on the remotes.
3. Press the red Sync button on the Wii, and then on one of the remotes.
4. Repeat for whatever remotes need synced.
This will make every remote act like the P1 remote. For temporary syncing, just go into the Home Menu and click Wii Remote Settings. Click on another option(it'll say to press 1 and 2) and follow the instructions.
Have you tried syncing the Wii remotes? To sync, turn the Wii on, open the back of the remote and then press a red button that says "SYNC". Then open the SD card slot in the front of the Wii and press another red "SYNC" button. If you do this, your Wii remotes should be able to turn on.
Hmmmm do they connect to your wii or not.. if they do then try and nothing happens then either your wii isnt picking up the command or the remotes buttons are messed up.. you probably have to replace the remotes or the wii ... if you have warranty go to the place you bought it and ask for it to be repaired
You need to sync your Wii-motes to the system. Open the battery compartment on the backs of your remotes and the SD slot on the front of your Wii. Press the red SYNC button on the Wii console first and then on the Wii-motes. The remotes should syncronize to your system and work fine.
First unplug the AC adapter from power cord and wait 10 min.Then plug it again and open the front cover on your Wii, then push the red button there, then open the batteries cover on your Wii Remote and push the red button there.Do the same for second Wii Remote.If this not help press and hold the red SYNC button on the console for 15 seconds. This will clear all synced Wii Remotes from the console.Then try sync the Remotes again.
Follow this procedure: 1. Turn the Wii console on and wait until the "Health & Safety" screen appears (don't press A).
Open the SD Card slot cover on the front of the Wii console, just below
the disc drive, and press and hold the red SYNC button for 15 seconds.
This will clear all synced Wii Remotes from the console.
Resync the Wii Remote by removing the battery cover and pressing the
red "SYNC" button. Do this for all Wii Remotes you wish to use, and
test for proper response.
4. If the steps above do not work,
remove the batteries of the Wii Remote and leave them out for at least
2 or 3 minutes. Reinsert the batteries and sync the Wii Remote again.
Test for proper response.
If after removing the batteries for several minutes, and resyncing
the Wii Remote, your still unable to get the Wii Remotes to work, try
syncing another Wii Remote if available.
* If another Wii Remote works, then your previous Wii Remote will need to be repaired.
* If multiple Wii Remotes do not work, or you only have one Wii Remote, a repair of the Wii console is necessary.
I had the same problem. When I looked at my system, I noticed the sensor was turned sideways with my tv remote in front of it. When I turned my sensor around correctly, and moved my tv remote away from it, the arrows suddenly appeared! Make sure nothing is blocking your sensor!