Question about GE WWSE6260B Top Load Washer

1 Answer

WWSE3160A0AA waching machine turns on the light

Hi,

My washing machine model GE WWSE3160A0AA turns the lights ON when I make the adjustment on the control panel but soon after that turns itself OFF and does not starts.

Please let me know what should I do or check or change.

Thanks,
Hamid

Posted by hnbhalli on

Ad

1 Answer

Anonymous

Replace the control board behind the panel. depending on the age of machine. you may just have to replace the machine.

Posted on Aug 17, 2008

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Model gfwn1100 front load washer


It shuts down because of time out, is the water turned on, sounds stupid but it has happened several times, I go on a service call just to turn the water on to the machine.

Feb 03, 2014 | GE Washing Machines

1 Answer

Ge top load washer lights up but wont turn on


check the bottom right coner take the panel off and cheack the pumps not blocked , or its the door lock ,or pc board

Jan 18, 2013 | GE WHRE5550K Top Load Washer

1 Answer

Hi my washing machine first would not spin, you had to turn it on as it turns it self off. Now it turns on but as soon as it starts to agigtate it turns power off and cant be turned back on for a few...


It sounds like there's a problem in the motor controller module or the motor itself. Unplug the machine first for at least 30 minutes to eliminate the possibility of an electronic glitch. If unplugging it doesn't address the issue, disconnect power then raise the console to access the motor controller module. Disconnect the pump and motor harness including the rotor position sensor harness from the motor controller module.

Reconnect power then start the machine. The problem is either of the disconnected parts if the machine doesn't shut itself off. Reconnect them one at a time then restart the machine and you should be able to find which one is causing the machine to shut itself off.

The problem is in the motor controller module if the machine still shuts itself off with the pump/motor and rotor position sensor harnesses. Replacing the module is the only viable solution.

Indicate the exact model number of the machine should you need further assistance. You don't have to rate this solution in order to reply or post additional information.

Jan 01, 2011 | Fisher and Paykel Washing Machines

1 Answer

Washer stops by itself, have to press start continuously


I would check the inverter on top of the motor. The flashin led light is a code the code legend is on the wiring schematics behind the control panel

May 07, 2010 | GE WBSE3120B Top Load Washer

1 Answer

My machine keeps stopping through a wash. it tarts fine but then it turns off by itself. what can I do to fix it. it literally turns off by itself!


IS IT ONE OF THOSE THAT HAS THE ELECTRONIC CONTROL PANEL. YOU HAVE TO MAKE SURE YOUR ELECTRICAL LINE IS GOOD. IF SO, YOU HAVE A BAD CONTROL BOARD

Jan 16, 2010 | GE Washing Machines

1 Answer

GE washer Model S3600DOWN will not turn off water. overflows WHY?


suspect water level control they call it a pressure switch
there is a quarter inch line that runs from tub to pressure switch that line can sometimes plug requiring line be removed from pressure switch and cleared
http://www.repairclinic.com/Washing-Machine-Top-Load-GE-Style-Appliance-Diagram
this web page shows a breakdown of commom top load ge washing machine level control is located in top panel
before opening top panel unplug washer from wall
if clearing line does not work level control will probably need to be replaced suggest take picture or draw out
where three wires are hooked before removing part or
change 1 wire at a time to avoid mixing up wiring

Dec 12, 2009 | GE Washing Machines

1 Answer

Blinking lights on control panel


Same issue, machine is about 30 days past waranty. Door switch broke, but of course they (GE repair) do not fix the switch, you have to order the Escutcheon Body (whole panel) to fix ~$350 total.

Apr 26, 2008 | GE 24 in. GLD5860LSS Stainless Still...

1 Answer

Not spining


sounds like the lid switch.

Mar 09, 2008 | Washing Machines

Not finding what you are looking for?
GE WWSE6260B Top Load Washer Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Mike

Level 3 Expert

4369 Answers

Are you a GE Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...